Close

Ruger PC Carbine

The History of Sturm, Ruger & Co.

Sturm, Ruger & Company, Inc., more commonly known as Ruger, is an American firearm manufacturing company headquartered in Southport, Connecticut. Founded in 1949 by Alexander McCormick Sturm and William B. Ruger in a rented machine shop in Connecticut, the company has since become one of the largest firearm manufacturers in the world - shadowed only by Remington and perhaps Smith & Wesson.

Ruger is widely recognized for producing firearms that span a broad spectrum of uses such as bolt-action rifles and pistols, semi-automatic rifles, single-shot rifles, shotguns, and revolvers. As recognition of its quality products grew so did the public’s interest in investing in the company’s shares. Ruger went public in 1969 and grew exponentially since then, and it is on the New York Stock Exchange (NYSE:RGR) since 1990.

In 2020, Ruger made another big move with their acquisition of Marlin Firearms from Remington Outdoor Company.

For decades now both newbie and seasoned shooters have been consistently trusting Ruger’s guns for their excellent accuracy and superior long-term performance as evidenced by its continued success over all these years.

Today, Ruger’s most popular products include the Ruger 10/22 semiautomatic rifle, the .22 rimfire semi-automatic pistol Ruger MK IV, the bolt-action Ruger American rifle, the tried and tested Ruger No.1, and, of course, the timeless Ruger Security-Six revolvers.

Ruger PC Carbine Rifle Review

Ruger PC Carbine, chambered for 9 mm Luger

Figure 1: Ruger PC Carbine in 9 mm Luger (Source: Ruger)

In 2007, Ruger decided to retire the Ruger Police Carbine which was intended to be used together with Ruger semi-auto pistols by law enforcement. In 2017, however, Ruger went back to the drawing board and decided to reintroduce an improved and upgraded takedown version, and so the Ruger PC Carbine was born.

The Ruger PC Carbine is a robust blowback semi-auto carbine designed for pistol calibers. Unlike its predecessor, it doesn’t just take the Ruger pistol magazines, but instead also accepts some of the most popular Glock magazines. It comes ready for Ruger mags out of the box, but an additional Glock magazine well is also supplied and can be easily installed if needed.

It is fitted with a sturdy synthetic stock made from dense nylon. Visually, the gun embraces a classic law enforcement style with its sharp black synthetic finish.

Comfort hasn't been overlooked, either. The Carbine includes a soft rubber buttpad and comes with three extra spacers. This gives you some wiggle room to adjust the length of the stock and find that perfect fit.

The 410 mm barrel is cold-hammer-forged and is made of chrome-moly steel. A standout feature is the easy takedown system. It allows for quick separation of the barrel/forend assembly from the action. You just lock the bolt back, ensure the rifle is unloaded, push the recessed lever, twist the components in opposite directions, and voila - the weapon is taken apart. As an added bonus, some models made after 2019 also come with a free-floating M-LOK handguard.

With a trigger akin to the one on the Ruger 10/22, the PC Carbine offers a light and crisp pull for accurate shooting. The cross-bolt safety is conveniently located at the front of the trigger guard. This is a departure from the Police Carbine, where the safety was positioned at the rear of the guard.

Another departure from the Police Carbine, and a more significant one, is found on the receiver. PC Carbine's receiver is CNC-machined from a top-grade aluminum billet and comes with an integrated Picatinny rail. The old Ruger Police Carbine, on the other hand, was made with Ruger-style scope bases directly machined into the receiver. In that regard, the new PC Carbine is absolutely superior.

Ruger PC Carbine Calibers

Ruger PC Carbine can be chambered for:

  • 9 mm Luger

Ruger PC Carbine Variants

Strictly speaking, there is only one Ruger PC Carbine variant available with many subvariants that all have slight modifications that set them apart from the base model.

Ruger usually names rifle variants by either a model number or a certain distributor that secured special rights for exclusive distribution of a specific variant, such as Ruger PC Carbine Talo Distributor Exclusive, for instance.

The differences are usually only of aesthetic nature and don’t affect the overall feel or experience of the weapon. The models offered are also constantly updated, except for the base model which always stays the same.

These are the Ruger PC Carbine models available in May 2023:

  • Ruger PC Carbine “model 19102”

  • Ruger PC Carbine “model 19115”

  • Ruger PC Carbine “model 19117”

  • Ruger PC Carbine “model 19121”

  • Ruger PC Carbine “model 19124”

  • Ruger PC Carbine “model 19126”

  • Ruger PC Carbine “model 19127”

  • Ruger PC Carbine “model 19130”

  • Ruger PC Carbine “model 19100”

  • Ruger PC Carbine “model 19101”

  • Ruger PC Carbine “model 19116”

  • Ruger PC Carbine “model 19122”

  • Ruger PC Carbine “model 19105”, Talo Distributor Exclusive

  • Ruger PC Carbine “model 19106”, Lipsey’s Distributor Exclusive

  • Ruger PC Carbine “model 19107”, Sports South Distributor Exclusive

  • Ruger PC Carbine “model 19112”, Bill Hicks Distributor Exclusive

  • Ruger PC Carbine “model 19113”, Davidson’s Distributor Exclusive

  • Ruger PC Carbine “model 19129”, Talo Distributor Exclusive

  • Ruger PC Carbine “model 19131”, Sports South Distributor Exclusive

  • Ruger PC Carbine “model 19132”, Davidson’s Distributor Exclusive

  • Ruger PC Carbine “model 19134”, Talo Distributor Exclusive

  • Ruger PC Carbine “model 19135”, Talo Distributor Exclusive

All Ruger PC Carbine models come with an integrated Picatinny rail for ease of scope mounting.

Ruger PC Carbine receiver

Figure 2: Ruger PC Carbine with an integrated Picatinny rail (Source: Ruger)

Scope Mounts Interchangeable with Ruger PC Carbine

Rifles That Have One-Piece Scope Mounts Interchangeable with Ruger PC Carbine

The necessary condition for rifles to have one-piece scope mounts interchangeable is that the mounting surfaces of these rifles match in every dimension. This means that any rifle with a Picatinny rail will have one-piece scope mounts interchangeable with the Ruger PC Carbine.

Rifles That Have Two-Piece Scope Mounts Interchangeable with Ruger PC Carbine

The situation with two-piece scope mounts is the same as with the one-piece scope mounts when it comes to rifles that are equipped with a Picatinny rail.

Any rifle with a Picatinny rail will have two-piece scope mounts interchangeable with the Ruger PC Carbine.

Best Scope Mounts for Ruger PC Carbine

Fixed Scope Mounts for Ruger PC Carbine

Quality and reliability are just two of many positive nouns we could use to describe Contessa scope mounts, and we can confidently recommend these Contessa Picatinny rings as one of the best fixed scope mounts for a Picatinny rail:

Detachable Repeatable Scope Mounts for Ruger American Rifle (Picatinny)

If you want to retain zero without any additional tools or adjustments while attaching or detaching your optics from the rifle, then detachable repeatable scope mounts are the way to go.

The Recknagel SSK-II One-Piece Mount is definitely our top pick of a detachable repeatable scope mount for Ruger PC Carbine. It is made in Germany and comes with a 10-year warranty:

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters
Sort
1 Item
Show
per page
Close
Sort By
Filters
Sort
1 Item
Show
per page
Close
Sort By

VIDEO