Beretta ARX 200

Sub Categories

Red Dot Sights Mounts

The History of Beretta

The Beretta company has a rich and storied history that dates back to the year 1526. It all began when Mastro Bartolomeo Beretta sold 185 harquebus barrels to the Venice Arsenal. The production of firearms has remained within the family to this day, making Beretta the oldest active firearms manufacturer in the world.

In the early 1800s, Pietro Antonio Beretta traveled throughout Italy to promote the quality of his products and secure new orders. Despite the challenges posed by foreign rule, he honed his skills in crafting barrels for smooth-bore shotguns and pistols. He eventually registered the company under the official name, Fabbrica d'Armi Pietro Beretta. By the end of the 17th century, Beretta had established itself as the second-largest manufacturer of gun barrels in Gardone Val Trompia, Italy.

In 1918, the Italian army adopted the use of the Beretta Model 1918, a groundbreaking submachine gun. During World War 2, the company was required to manufacture weapons for the Italian regime, even though its political views were predominantly liberal. However, some of the production was carried out secretly to supply the Partisans, which resulted in the German SS confiscating the company in 1943. The German forces even took Pietro Beretta, the head of the company, hostage. In response, the Partisans raided the Brescia town, successfully regaining control of the factory.

Following the War, Beretta altered the design of the M1 to create the Beretta BM-59 rifle, which resembled the M14 battle rifle. However, their production shifted towards firearms for the civilian market after the War. In the 1970s, Beretta entered into an agreement with the Brazilian government to produce firearms for the Brazilian Army. This collaboration lasted until 1980. In the 1980s, the Beretta 92 pistol was chosen to be the standard service handgun of the United States Army.

Although Beretta is primarily known for their semi-automatic pistols, such as the Model 1915, M1923, 418, M1934/M1935, M1951, and 70 series, they have also manufactured a variety of other weapons including revolvers, submachine guns, grenade launchers, and rifles and carbines like the BM-59, 501 (sporting rifle), Rx4 Storm, Cx4 Storm, and BRX1 straight-pull bolt-action rifle. In addition, Beretta has a long tradition of producing side-by-side shotguns, over-and-under shotguns and semi-automatic shotguns offered in various grades, with some of the popular models being the A400, A300, Beretta 686, DT10, AL391 etc.

Beretta Holding is currently the parent company of several subsidiary firms, including Beretta USA, Benelli, Tikka, Stoeger, SAKO, Uberti, Franchi, and Burris Optics. Today in 2023, the company Fabbrica d'Armi Pietro Beretta, also known as Beretta S.p.A., is led by Franco Gussalli Beretta who serves as the President and CEO. The company has been owned by the same family for nearly five hundred years, a testament to its longevity and heritage. Its legacy has been passed down through generations, continuing to innovate and adapt to the changing needs of its customers.

Beretta ARX 200 Rifle Review

The Beretta ARX 200 is an automatic, gas-operated, selective-fire infantry rifle that was introduced in 2015 and chambered for the 7.62x51 NATO cartridge. It is equipped with a short-stroke gas piston system and a rotating bolt, which allows it to be fired both automatically and semi-automatically.

The barrel of the Beretta ARX 200 comes in at a length of 508 mm (20-inch) allowing for good accuracy at longer ranges. Additionally, the rifle has three gas settings for normal, adverse, and suppressed fire.

Like models ARX 100 and 160, the ARX 200 features ambidextrous controls for safety, magazine release button, and a fire selector. However, unlike the ARX 160, the side of ejected shells cannot be chosen by the user and is predetermined by the manufacturer. Nevertheless, the charging handle can still be switched from one side of the receiver to the other.

The rifle's free-floating hammer-forged barrel can be swapped out quickly and the upper part of the receiver is equipped with a Picatinny rail for mounting purposes. Additional Picatinny rails can be installed on the KeyMod sides of the forearm for mounting various accessories. The rifle is also equipped with a modular magazine with a 20-round capacity.

Beretta ARX 200

Figure 1: Beretta ARX 200, chambered for 7.62X51 NATO (Source: https://www.berettadefense.com/products/arx200-16-bdt/)

Beretta ARX 200 Calibers

The rifle is chambered for the following calibers:

7.62x51 NATO

Beretta ARX 200 Variants

The Beretta ARX 200 is available in the following variants:

Beretta ARX-200 DMR

Beretta ARX 200 comes with a Picatinny rail preinstalled on the top of the receiver which can be used for scope mounting purposes.

The receiver of Beretta ARX 200

Figure 2: The receiver of Beretta ARX 200, chambered for 7.62x51 NATO (Source: https://www.gmktp.co.uk/product/arx-200)

Scope Mounts Interchangeable With Beretta ARX 200

Rifles That Have One-Piece Scope Mounts Interchangeable With Beretta ARX 200

For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. Rifles that have one-piece mounts interchangeable with Beretta ARX 200 are the following:

All rifles with a Picatinny rail for mounting purposes

Rifles That Have Two-Piece Scope Mounts Interchangeable With Beretta ARX 200

For two-piece mounts to be interchangeable, the mounting surfaces of the rifle must match in every dimension except the action length which can vary. Rifles that have two-piece mounts interchangeable with Beretta ARX 200 are the following:

All rifles with a Picatinny rail for mounting purposes

Best Scope Mounts for Beretta ARX 200

Fixed Scope Mounts for Beretta ARX 200

If you're looking for a durable and reliable mounting solution for your Picatinny rail, then this Spuhr mono-block mount is an excellent choice. Made of high-quality aluminum, this mount is built to last and can handle even the toughest conditions. It comes with a 2-year warranty.

Detachable Repeatable Scope Mounts for Beretta ARX 200

ERA-TAC GEN-2 detachable repeatable mount is a great choice for your Rx4 Storm. Made from high-quality aluminum, it is built to last and is covered by a 2-year warranty for added peace of mind. With its detachable and repeatable design, you can easily remove and reattach your optic without losing zero, making it a great option for those who want to switch between different setups.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Compatibility Above

Filters

Sort

In stock

Outerimpact Adjustable Co-Witnessing Modular Red Dot Adapter

$165.00 $185.00

Add to compare

Filters

Sort

Beretta ARX 200

Sub Categories

The History of Beretta

Beretta ARX 200 Rifle Review

Beretta ARX 200 Calibers

Beretta ARX 200 Variants

Scope Mounts Interchangeable With Beretta ARX 200

Rifles That Have One-Piece Scope Mounts Interchangeable With Beretta ARX 200

Rifles That Have Two-Piece Scope Mounts Interchangeable With Beretta ARX 200

Best Scope Mounts for Beretta ARX 200

Fixed Scope Mounts for Beretta ARX 200

Detachable Repeatable Scope Mounts for Beretta ARX 200

Help Us Build Our Riflescope Mounts Database

Outerimpact Adjustable Co-Witnessing Modular Red Dot Adapter

VIDEO

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Beretta ARX 200

Sub Categories

The History of Beretta

Beretta ARX 200 Rifle Review

Beretta ARX 200 Calibers

Beretta ARX 200 Variants

Scope Mounts Interchangeable With Beretta ARX 200

Rifles That Have One-Piece Scope Mounts Interchangeable With Beretta ARX 200

Rifles That Have Two-Piece Scope Mounts Interchangeable With Beretta ARX 200

Best Scope Mounts for Beretta ARX 200

Fixed Scope Mounts for Beretta ARX 200

Detachable Repeatable Scope Mounts for Beretta ARX 200

Help Us Build Our Riflescope Mounts Database

Outerimpact Adjustable Co-Witnessing Modular Red Dot Adapter

VIDEO

Your wishlist