Now Shopping by

Manufacturer
Optilock

Clear All

Sako VL63 Finnwolf

Sub Categories

Bases and Rails

The History of Sako

Sako (Suojeluskuntain Ase- ja Konepaja Oy) is rifle and ammunition manufacturer located in Riihimäki, Finland. It was founded in 1921, after the rifle repair workshop, opened in former Helsinki brewery, became independent of the civil guard. The workshop grew into a weapons factory, which produced hunting rifles as well as cartridges and moved its headquarters from Helsinki to Riihimäki. The first civilian rifle bearing the name Sako, was the L42, prototyped in 1942 and commercially manufactured a few years later.

After the World War II, domestic hunting culture thrived and Sako invested in development of hunting rifles. Due to this investment, domestic sales increased along with export to the USA and the rest of the world. In the 1980s, Sako merged with another firearm manufacturer, Tikkakoski and gained a valuable rifle line called Tikka. The production of military and law enforcement weapons started when Finnish defence forces ordered assault rifles and cartridges from Sako.

The company has changed multiple owners since 1921, but has ultimately been sold to Italian Beretta Holding in 2000. In 2006, Sako celebrated its 85th anniversary by launching a new hunting rifle family, Sako 85. In 2020, Sako introduced S20, the first truly hybrid rifle, designed for both; hunters and tactical shooters. Another novelty presented by Sako in 2020 was a brand new, lead-free Sako Powerhead bullet.

Sako VL63 Finnwolf Rifle Review

Sako VL63 Finnwolf is one of the finest lever action rifles ever made, which was produced from 1959 to 1974. We believe mounts made for modern-day rifle Sako 85 of receiver length S will fit on this rifle, but we are not sure, because the mounting system on the rifle looks like the one on modern Sako 85, but it is not identical.

Sako VL63 Finnwolf Calibers

The rifle is chambered for:

.243 Win.
.308 Win.

Sako VL63 Finnwolf, chambered for .243 Win.

Figure 1: Sako VL63 Finnwolf, chambered for .243 Win. (Source: https://www.icollector.com/Sako-VL63-Finnwolf-243-Win-SN-1005_i29584939)

The receiver of Sako VL63 Finnwolf comes with a pre-installed tapered dovetail for mounting purposes, held in place by four screws.

The receiver of Sako VL63 Finnwolf, chambered for .243 Win.

Figure 2: The receiver of Sako VL63 Finnwolf, chambered for .243 Win. (Source: https://bid.wardsauctions.com/Non-Restricted-rifle-Sako-model-VL63-Finnwolf-243-cal-lever-action-w-bbl-length-23-Blued-barre_i40841436)

Scope Mounts Interchangeable With Sako VL63 Finnwolf

One thing worth pointing out when it comes to rifle mounts is that Sako has been using the same tapered dovetail mounting system for a few decades already. This means that some Sako rifles have the same mounting surface on the receiver, despite being decades apart considering their production date. With this, Sako achieved mounting system consistency, so even mounts made for today’s “Sako 85” series of rifles will fit the receivers of older Sako rifles. Rifle mounts manufacturers mainly use only present day Sako rifles (Sako 85) to designate which mount fits which receiver length. Then it’s up to the user to do the research, whether the mount will fit their rifle if they don’t have the newest rifle model.

Rifles which have the same mounting surface as Sako VL63 Finnwolf:

So, if you want to buy mounts for Sako VL63 Finnwolf or any other rifle from the list above, there is a high probability they will have Sako 85 S written in their name, because Sako 85 is currently the newest Sako model with tapered dovetail.

Please note that the mounts are only interchangeable between the abovementioned rifles when VL63 Finnwolf comes with a pre-installed dovetail for mounting purposes. Should you happen to own the rifle without the installed dovetail (only holes in the receiver), please contact us at info@optics-trade.eu. We will help you find a suitable mounting solution.

Best Scope Mounts for Sako VL63 Finnwolf

Fixed Scope Mounts for Sako VL63 Finnwolf

For fixed mounts on this rifle, we recommend Optilock Sako Short mounting bases. We can insert rings onto these bases, but we must be careful, because Sako Optilock rings are available only for 1inch (25.4mm), 30mm and 34mm diameter scope tubes. One special feature of the Optilock rings are the polymer inserts (except the 34mm ring, which does not include inserts), which prevent scratches on the scope. If we want to install scopes with rails or scopes with tube diameters other than these of Optilock rings, we need to reach for rings of other companies like Recknagel, EAW or Osuma, and they fit Optilock bases as well.

Sako short base

Detachable Repeatable Scope Mounts for Sako VL63 Finnwolf

For detachable repeatable mounts, we would recommend pivot mounts, more specifically MAKlassic two-piece design mount, because they are the lowest of all pivot mounts. Pivot mounts are usually not among the lowest, but with Sako rifles, they are usually even higher than on an average rifle because of their special tapered dovetail mounting system.

Picatinny Rails for Sako VL63 Finnwolf

All of the Picatinny rails for Sako VL63 Finnwolf are made similarly, all of them made from multiple parts.

Help Us Build Our Riflescope Mounts Database

If you have this rifle or any other rifle at home, we would really appreciate it if you could send us some photos of the rifle receiver (mounting surface of the rifle when there are no mounts installed), because it would help us expand our rifle mounts database. If you send us a photo of rifle receiver which we don’t already have, that would be of great value to us and we will definitely reward you for your help.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Compatibility Above

Filters

Sort

Filters

Sort

Sako VL63 Finnwolf

Sub Categories

The History of Sako

Sako VL63 Finnwolf Rifle Review

Sako VL63 Finnwolf Calibers

Scope Mounts Interchangeable With Sako VL63 Finnwolf

Rifles which have the same mounting surface as Sako VL63 Finnwolf:

Best Scope Mounts for Sako VL63 Finnwolf

Fixed Scope Mounts for Sako VL63 Finnwolf

Detachable Repeatable Scope Mounts for Sako VL63 Finnwolf

Picatinny Rails for Sako VL63 Finnwolf

Help Us Build Our Riflescope Mounts Database

Optilock Sako Short Base

Optilock Sako Short Base, Stainless Steel

Optilock Sako Long Base

Optilock Sako Extended Base

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Sako VL63 Finnwolf

Sub Categories

The History of Sako

Sako VL63 Finnwolf Rifle Review

Sako VL63 Finnwolf Calibers

Scope Mounts Interchangeable With Sako VL63 Finnwolf

Rifles which have the same mounting surface as Sako VL63 Finnwolf:

Best Scope Mounts for Sako VL63 Finnwolf

Fixed Scope Mounts for Sako VL63 Finnwolf

Detachable Repeatable Scope Mounts for Sako VL63 Finnwolf

Picatinny Rails for Sako VL63 Finnwolf

Help Us Build Our Riflescope Mounts Database

Optilock Sako Short Base

Optilock Sako Short Base, Stainless Steel

Optilock Sako Long Base

Optilock Sako Extended Base

Your wishlist