Sako TRG-S M995 Magnum

Sub Categories

Bases and Rails

The History of Sako

Sako (Suojeluskuntain Ase- ja Konepaja Oy) is rifle and ammunition manufacturer located in Riihimäki, Finland. It was founded in 1921, after the rifle repair workshop, opened in former Helsinki brewery, became independent of the civil guard. The workshop grew into a weapons factory, which produced hunting rifles as well as cartridges and moved its headquarters from Helsinki to Riihimäki. The first civilian rifle bearing the name Sako, was the L42, prototyped in 1942 and commercially manufactured a few years later.

After the World War II, domestic hunting culture thrived and Sako invested in development of hunting rifles. Due to this investment, domestic sales increased along with export to the USA and the rest of the world. In the 1980s, Sako merged with another firearm manufacturer, Tikkakoski and gained a valuable rifle line called Tikka. The production of military and law enforcement weapons started when Finnish defence forces ordered assault rifles and cartridges from Sako.

The company has changed multiple owners since 1921, but has ultimately been sold to Italian Beretta Holding in 2000. In 2006, Sako celebrated its 85th anniversary by launching a new hunting rifle family, Sako 85. In 2020, Sako introduced S20, the first truly hybrid rifle, designed for both; hunters and tactical shooters. Another novelty presented by Sako in 2020 was a brand new, lead-free Sako Powerhead bullet.

Sako TRG-S M995 Magnum Rifle Review

In 1992 Sako introduced TRG-S M995 and TRG-S M995 Magnum as hunting-oriented variant of the TRG line. They share some similarities with TRG-41, as they use the same scaled up magnum action and similar bolt. The difference between the models apart from stock is that the TRG-S M995 has a typical Sako tapered dovetail for mounting purpose, compared to TRG-41, which has a standard straight dovetail. Mounts fit for standard TRG-S M995 Mag version rifle are probably the same ones that fit Sako 85 XL. This means the rifle is not as rigid for smaller calibres.

Sako TRG-S M995

Figure 1: Sako TRG-S M995 Magnum in .338 Lapua Magnum (source: https://www.sako.fi/rifles/old-models/trg-s)

Sako TRG-S M995 Magnum Calibers

TRG-S M995 Mag. version is chambered for:

.270 Wby. Mag.
7mm Rem. Mag.
7mm Wby. Mag.
7mm STW
7.21 Firebird
.300 Win. Mag.
.300 Wby. Mag.
7.82 (.308) Warbird
.30-378 Wby. Mag.
.338 Win. Mag.
.340 Wby. Mag.
.375 H&H Mag.
.416 Rem. Mag.
.338 Lapua Mag.

The receiver of Sako TRG-S M995 Magnum features a uniquely shaped cone dovetail on the top.

The receiver of Sako TRG-S M995 chambered for .308 Win. - The Magnum version has the same, although a slightly larger mounting surface.

Figure 2: The receiver of Sako TRG-S M995 chambered for .308 Win. - The Magnum version has the same, although a slightly larger mounting surface (source: gunauction.com)

Scope Mounts Interchangeable With Sako TRG-S M995 Magnum

One thing worth pointing out when it comes to rifle mounts is that Sako has been using the same tapered dovetail mounting system for a few decades already. This means that some Sako rifles have the same mounting surface on the receiver, despite being decades apart considering their production date. With this, Sako achieved mounting system consistency, so even mounts made for today’s “Sako 85” series of rifles will fit the receivers of older Sako rifles. Rifle mounts manufacturers mainly use only present day Sako rifles (Sako 85) to designate which mount fits which receiver length. Then it’s up to the user to do the research, whether the mount will fit their rifle if they don’t have the newest rifle model.

Rifles which have the same mounting surface as Sako TRG-S M995 Magnum:

Sako 85 XL
Sako 75 V

So, if you want to buy mounts for Sako TRG-S M995 Magnum or any other rifle from the list above, there is a high probability they will have Sako 85 XL written in their name, because Sako 85 is currently the newest Sako model with tapered dovetail.

Best Scope Mounts for Sako TRG-S M995 Magnum

Fixed Scope Mounts for Sako TRG-S M995 Magnum

For fixed mounts on this rifle, we recommend Optilock Sako Extended mounting bases. We can insert rings onto these bases, but we must be careful, because Sako Optilock rings are available only for 1inch (25.4mm), 30mm and 34mm diameter scope tubes. One special feature of the Optilock rings are the polymer inserts (except the 34mm ring, which does not include inserts), which prevent scratches on the scope. If we want to install scopes with rails or scopes with tube diameters other than these of Optilock rings, we need to reach for rings of other companies like Recknagel, EAW or Osuma, and they fit Optilock bases as well.

Sako extended base

Detachable Repeatable Scope Mounts for Sako TRG-S M995 Magnum

The only Dentler rails available for Sako TRG-S M995 Magnum rifles are Dentler BASIS, which allow only Dentler mounts to be installed on them. It is one of the most reliable and accurate quick release mounts for Sako TRG-S M995 Magnum on the market. Unfortunately, Dentler BASIS bases don't support adjustments on the bases, meaning they are not as revolutionary as the Dentler BASIS VARIO.

Explanation of Dentler mounts can be seen on our Roundtable video:

If you would prefer pivot mounts, we would recommend purchasing MAKlassic two piece design mount, because they are the lowest of all pivot mounts. Pivot mounts are usually not among the lowest, but with Sako rifles, they are usually even higher than on an average rifle because of their special tapered dovetail mounting system.

Picatinny Rails for Sako TRG-S M995 Magnum:

All of the Picatinny rails for Sako TRG-S M995 Magnum are made similarly, all of them made from multiple parts.

Help us build our riflescope mounts database

If you have this rifle or any other rifle at home, we would really appreciate it if you could send us some photos of the rifle receiver (mounting surface of the rifle when there are no mounts installed), because it would help us expand our rifle mounts database. If you send us a photo of rifle receiver which we don’t already have, that would be of great value to us and we will definitely reward you for your help.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Compatibility Above

Filters

Sort

In stock

Henneberger HMS Aimpoint Micro mount for Sako

$87.00

Sako TRG-S M995 Magnum

Sub Categories

The History of Sako

Sako TRG-S M995 Magnum Rifle Review

Sako TRG-S M995 Magnum Calibers

Scope Mounts Interchangeable With Sako TRG-S M995 Magnum

Rifles which have the same mounting surface as Sako TRG-S M995 Magnum:

Best Scope Mounts for Sako TRG-S M995 Magnum

Fixed Scope Mounts for Sako TRG-S M995 Magnum

Detachable Repeatable Scope Mounts for Sako TRG-S M995 Magnum

Picatinny Rails for Sako TRG-S M995 Magnum:

Help us build our riflescope mounts database

Your wishlist