Close

Zeiss ZM / VM rail Mounts

VIDEO

The design of the Zeiss ZM/VM rail is a 45° prism with an inner niche for mounting elements. When mounting a rife scope to a rifle with a purposely made rail you can easily see the advantages over the more traditional mounting with rings. For starters its quicker and easier, with no additional tools required for the procedure. The only main disadvantage when compared to rings is the price, which is usually a bit higher than rings, and the availability. Not all manufacturers produce rifle scopes which are fitted with rails. When you are mounting your rifle scope with the Zeiss ZM / VM rail you can clearly see the advantages: it improves the stability of the riflescope, it is more robust and reliable, the riflescopes main tube is not under stress and thus its constructionally intact.

Mounting with a rail does not leave mounting marks on the main tube and it is easier to achieve the proper eye relief. When mounting with a rail you always get a perfect horizontal level as the reticle is aligned with the rail. Mounting with a scope rail solutions is always the preferred way over the mounting with rings and in the future most of the European premium rifle scopes producers will exclusively use this approach. We are waiting on the first scope that will be produced with mounting rail only (apart from Zeiss Diarange which contains laser and cannot be mounted with rings at all). Torque values for tightening the mounting elements in the scope rail should be between 4-5Nm.

The Zeiss ZM/VM rail is the most widespread of all rail mounting solutions and it is being used by the following manufacturers: Zeiss, Docter, Leica, Minox, Steiner, S&B (on some scopes, marker with LMZ), Meopta and Blaser.

The main mounting manufacturers that are producing elements for Zeiss ZM/VM rails are: EAW, Recknagel, MAK, Rusan, Henneberger, Blaser and INNOmount

Filters
Sort
14 Items
Show
per page
Close
Sort By
Filters
Sort
14 Items
Show
per page
Close
Sort By

VIDEO

Blaser has revolutionised the way rifle scopes are mounted on the rifles with their saddle mount system. The main feature of this system is that it can be found with all Blaser rifles, no matter what type or model they are. That means that Blaser succeeded to offer the same mounting solution on repeating rifles like on the R93, R8, Combination rifles like B95/97, Single Shot break rifles like K95, Drillings like D99, Bockdrillings like D14, side by side rifles like S2 and all other rifles made by Blaser.

This system is thus by far the most versatile mounting system on the market. Additional advantages that it offers are:

This mounting system has four notches for mounting directly on the barrel and not on the action. All mounts that attached to all four notches can be used on all types of Blaser rifles. Those mounts however that are attached only to 2 notches (most commonly these are mounting solutions for the red dot sights and reflex sights) are rifle specific. That means that MAKnetic for Docter Sight for Blaser R8 will not fit on any other Blaser rifle except R8. Such mounts are very elegant due to their small size but their versatility is limited to one specified type of Blaser rifle only.

Another important consideration that needs to be pointed out is that all mounts for Blaser rifles (original and non-original) are designed to work only on one single barrel. That means that if you have set a mount on one barrel (setting a mount on the Blaser rifle means to tighten the adjustment screw in a way that clamping of the mount on the four notches is done by exactly appropriate force) it will work only on that Blaser barrel and not on others. You can have multiple optics on one Blaser barrel but you cannot have a single optics on multiple Blaser barrel. The only exception to this rule are Dentler mounts.

This mounting system can be found on the following Blaser rifles:

  • R8
  • R93
  • B95/B97
  • D99
  • K95
  • S2