CZ 600 Trail

Sub Categories

Scope Rings for Blaser Saddle

About the CZ

CZ firearms or CZ (which stands for Česká zbrojovka) is based in Uhersky Brod, a small town in the southeastern Czech Republic. CZ has its start in 1936 as a subsidiary of CZ Strakonice, which was itself a subsidiary of Zbrojovka Brno. The arms industry was growing quickly in Czechoslovakia at the time, and Uhersky Brod was chosen since it was secluded and lay beyond the range of German bombers, which, in case of an invasion, would target the arms factories first. The factory initially mostly produced pistols and small-caliber rifles; however, when German forces occupied Czechoslovakia in 1939, the company was renamed to Böhmische Waffenwerke and was forced to make machine guns, such as LK-30 and MG-17, for the German military.

After the end of World War II, the Soviets gained control of the region and the company was nationalized by the communist government, producing air weapons, machine guns, submachine guns, motorcycle and sewing machine parts. In 1957 the company started production of the Model 58, and in 1961 they introduced the world-famous Model 61 Škorpion machine pistol. The year 1975 marked the release of yet another popular model, the CZ 75 pistol which many manufacturers have since used as basis for their own products.

CZ once again became an independent company in 1992 following the fall of the Soviet Union. In the decades after, they have continued production of a variety of weapons seizing the market of law enforcement and military firearms with service pistols, assault rifles and grenade launchers with which they also helped equip the Czech army. They have strived to widen their presence on the international markets, opening a facility for assembly and repairs of CZ pistols in Peru and spreading production of their firearms (certain models of the CZ-P10 pistol) to the United States in 2019. As of 2021 they employed around 1500 workers.

CZ 600 Trail Rifle Review

CZ 600 is a centerfire bolt-action rifle introduced in 2021 to replace CZ’s entire centerfire line. CZ 600 is a highly modular rifle made so by the interchangeable barrel design where the barrel slides into the receiver and locks into the action with three set screws which makes it easy to remove without the help of a gunsmith. The bolt locks directly into the barrel where there are 3 locking lugs (6 on the magnum action models). The safety is a special vertical plunger design – it consists of a button located at the top tang position which goes up and down through the tang when pushed. Fire mode is activated by pushing the safety down with your thumb and pushing up with your trigger finger activates the safe mode. The feeding system is a controlled-round feed with a short extractor. Loading is possible either through the top of the action or through the magazine. By opening the bolt slowly, the case can be dropped nearby or inside the receiver, whereas opening it quickly can send the case flying away. A single-stage trigger is featured on all models except the CZ 600 Trail which utilizes a two-stage trigger.

CZ 600 Trail comes only in one action size: mini. It features an aluminum receiver and a four-position telescopic stock made of polymer.

CZ 600 Trail

Figure 1: CZ 600 Trail. Source: https://www.czub.cz/en/firearms-and-products-product/cz-600-trail

CZ 600 Trail is chambered for the following calibers:

.223 Rem.
7.62x39

CZ 600 Trail features a built-in Picatinny rail.

CZ 600 Trail Picatinny rail

Figure 2: CZ 600 Trail Picatinny rail.

This rifle has interchangeable one-piece and two-piece mounts with every rifle that has an integrated Picatinny rail. Because it has a flat top, care has to be taken to select a high enough mount, so that the bell of the scope does not sit on the rail.

Our recommendations for mounts

Fixed mounts

We recommend purchasing these Rusan Picatinny Tactical Rings. These high-quality and sturdy rings are made of aluminum which makes them perfect for the rifle's aluminum receiver.

Detachable repeatable mounts

Here we recommend detachable repeatable INNOmount which are of good quality.

Help us build our riflescope mounts database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

In stock

Tier-One 40 mm Blaser RingSet - 7mm - 0 MOA

Tier-One Blaser Pair of Rings, 40 mm

As low as $229.00

View Product

Add to compare

Filters

Sort

VIDEO

Blaser has revolutionised the way rifle scopes are mounted on the rifles with their saddle mount system. The main feature of this system is that it can be found with all Blaser rifles, no matter what type or model they are. That means that Blaser succeeded to offer the same mounting solution on repeating rifles like on the R93, R8, Combination rifles like B95/97, Single Shot break rifles like K95, Drillings like D99, Bockdrillings like D14, side by side rifles like S2 and all other rifles made by Blaser.

This system is thus by far the most versatile mounting system on the market. Additional advantages that it offers are:

Very low mounting height of scopes with rails like Zeiss ZM/VM, Swarovski SR, S&B Convex,
100% repeatability when detached and reattached,
small size and weight,
easy detaching and reattaching the scope to a rifle.

This mounting system has four notches for mounting directly on the barrel and not on the action. All mounts that attached to all four notches can be used on all types of Blaser rifles. Those mounts however that are attached only to 2 notches (most commonly these are mounting solutions for the red dot sights and reflex sights) are rifle specific. That means that MAKnetic for Docter Sight for Blaser R8 will not fit on any other Blaser rifle except R8. Such mounts are very elegant due to their small size but their versatility is limited to one specified type of Blaser rifle only.

Another important consideration that needs to be pointed out is that all mounts for Blaser rifles (original and non-original) are designed to work only on one single barrel. That means that if you have set a mount on one barrel (setting a mount on the Blaser rifle means to tighten the adjustment screw in a way that clamping of the mount on the four notches is done by exactly appropriate force) it will work only on that Blaser barrel and not on others. You can have multiple optics on one Blaser barrel but you cannot have a single optics on multiple Blaser barrel. The only exception to this rule are Dentler mounts.

This mounting system can be found on the following Blaser rifles:

R8
R93
B95/B97
D99
K95
S2

CZ 600 Trail

Sub Categories

About the CZ

CZ 600 Trail Rifle Review

Our recommendations for mounts

Fixed mounts

Detachable repeatable mounts

Help us build our riflescope mounts database

Tier-One Blaser Pair of Rings, 40 mm

VIDEO

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

CZ 600 Trail

Sub Categories

About the CZ

CZ 600 Trail Rifle Review

Our recommendations for mounts

Fixed mounts

Detachable repeatable mounts

Help us build our riflescope mounts database

Tier-One Blaser Pair of Rings, 40 mm

VIDEO

Your wishlist