MAKuick One-Piece QD, Sauer 404, Picatinny
In stock

MAKuick One-Piece QD, Sauer 404, Picatinny

As low as: $289.00
Dispatch time
Ships in 1-3 days
Return time
15 days

Products currently in stock

Status
BH - height
Price
Buy
18 mm
$289.00
1 2 3 4 6

Shipping Assistant

Choose your delivery destination & delivery service

Your selected location will be saved as you browse other products. A variety of payment options will be available for you to choose from during checkout.

Need help

Our dedicated team is ready to assist you with any issues before, during, or after your purchase. If you have any questions, please feel free to reach out:
Contact Us

MAKuick One-Piece QD, Sauer 404, Picatinny Product description

Introduction

MAK is a German company, specialized in mounting solutions for optics. Their offer also includes riflescopes and red dot sights. MAK's products, made with topmost precision, are known for their high quality. To appease every need when it comes to mounting solutions, MAK has many series of mounts in their offer.

Sauer & Sohn, frequently referred to as Sauer, is Germany's oldest firearms manufacturer and the second oldest in the world, founded in 1751. Even though they have been around for nearly three hundred years, they remain innovative. One of their most known firearms is Sauer 38H, an advanced semiautomatic pistol that was produced in great numbers – it featured a cocking/decocking lever.

About the rifle

Sauer 404 is a bolt-action rifle that was launched in 2015. It succeeded the 202 model. On the outside, it is very similar to its predecessor. Sauer has made changes regarding the safety – the rifle is no longer equipped with a down/up push system but with a de-cocker. On the receiver, there are no mounting holes – for the 404, Sauer came up with a unique QD mounting system. There is a lock on the magazine release button and the trigger is of a 4-weight type. Sauer introduced SUK (Sauer Universal Key) with the 404. It is integrated into the sling swivel in the front part of the rifle and can be used to make trigger adjustments and remove the barrel, butt, and forend. Sauer chambers this rifle for .243 Win., 6.5x55, 6.5 Creedmoor, .270 Win., 7x64, .308 Win., .30-06 Sprg., 8x57 IS, 9.4x62, 7mm Rem. Mag., .300 Win. Mag., 8x68 S, .338 Win. Mag., .375 H&H, .404 Jeffery, and 10.3x60R.

Mounting details

Mounting details

 

MAKuick one-piece

MAKuick mounts are robust and reliable. They offer a 100 % repeatability, meaning that the user can remove them and put them back onto the rifle without the need to re-zero. MAKuick mounts are designed so that they can withstand the recoil of even the most powerful calibers out there. They are lightweight because both the base and the rings are made from aluminum. The whole system that is in contact with the rifle (the clamping assembly) is made from steel. MAKuick is a versatile series of mounts – it allows mounting of all sorts of rings, all sorts of mounting rails (LM, ZM/VM, SR, Convex), different adapters that allow mounting of other devices such as ATN X-Sight; Pulsar Digisight, Apex, Trail; Fortuna devices etc. MAKuick mounts made for the mounting of riflescopes with a rail underneath are made of one part. Because of this, they are more robust, durable and reliable. For digital and thermal optical devices, the buyer has to pick a MAKuick base with four holes on which rings are usually put. Instead of the rings, the user mounts an adapter on top that works as a connector between the thermal optics and the MAKuick base. MAK makes one-piece MAKuick bases for the following rifles: CZ 527, CZ 550, Merkel KR 1, Merkel RX Helix – also fits on all Picatinny rails, Sauer 303, Sako 75, Sako 85 S, Sako 85 M, Tikka T3 and Blaser rifles. They also make a MAKuick base for break barrel rifles with a 12 mm dovetail and for break barrel rifles with a 14.5 mm dovetail (usually found on Czech break barrel rifles).

Picatinny rails

Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.

Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why ring mounts made for a Weaver rail will also fit on a Picatinny rail while ring mounts made specifically for a Picatinny rail will not fit on a Weaver rail. This is one of the main reasons why Picatinny is a far better mounting solution.

Mounting instructions

First, the user has to make sure that the rifle is fixed (it is advised that the rifle is put into a rifle holder). Once the mount is put onto the mounting surface and fixed by rotating the levers for 180°, the lock screws have to be unscrewed. The user then adjusts the clamping force of the adjustment screws with a hex key so that they are tightened but not too tightened. The lock screws have to be re-tightened to complete the mounting procedure. The recommended tightening torque is 4–5 Nm.

Warranty

The product has a warranty period of 10 years.

General properties

Manufacturer MAK
Mount series MAKuick
Made in Germany
Warranty 30 years
SKU 5072-50144c

Physical properties

Extension - KR KR 0.0 mm
Inclination 0 MOA
Type of mount Detachable Mounts
Mounts Fashion Hunting One-Piece Mounts, One-Piece Mount, Repeatable Mounts
Adju. windage No
Scope - Sight type Picatinny Rail
Color Black
Material Steel

Characteristics

Suitable for Compatibility Above Picatinny Rail
Suitable for Compatibility Below Sauer 303 (SUM), Sauer 404, Sauer SUM mount

Why Choose Optics Trade?

  • Worldwide shipping
  • Team of experts & enthusiasts
  • Customer satisfaction is top priority

Reviews & Testimonials

No reviews
Do you have any experience with this product?
We would love to hear your opinion by rating it:
Write a review

How do you rate this product?

Community uploads

First-hand experience is priceless, therefore we always want to know how others use the product we're interested in. Feel free to contribute with your own photos or videos!

Filter by:
Sort by:

Most common questions (Q&A)

Need help? Not sure about something? Don't hesitate - ask our community! Our experienced community is here to help you with this question.

I have purchased a fx wildcat air rifle with a Picatinny rail , mounting the new pulsar Digex c50 , I am wanting to mount the scope also on my Sauer 404 , would this rail be my best option I have Sauer swing off mounts with my z6i , thinking the rail would quickly exchange so I could fit the pulsar scope

by paul

Dear Sir,

thank you for contacting us.

The mentioned configuration would work with no problem but if you want to keep a 100% repeatability on the C50 riflescope you would also need a mount which offers repeatability and is suitable for picatinny rail. 

Thank you for your understanding.

If you will need any additional information please do not hesitate to contact us again.

Kind Regards

by Optics Trade team

I have sauer 404 rifle and burris eliminator II teliscope which mount is required this rifle

by Milap

Burris Eliminator can be installed by using the MAKuick mount on the page below.

https://www.optics-trade.eu/en/makuick-one-piece-qd-sauer-404-picatinny.html

by Optics Trade team

Hello would this
404 Mounts MAKuick One-Piece QD, Sauer 404, Picatinny

Fit directly and easily to my sauer 404 rifle. Would i need any other parts except for some rings?

Do you recommend this rail or shoudl i get the makuick 1 peice mount

Thanks

by Ismail

This mount fits directly on the receiver of your Sauer 404 rifle. On the upper side, there is a Picatinny rail that accepts Picatinny rings. If you need any additional assistance in terms of finding the appropriate rings, please contact us again.

by Optics Trade team

Hi, I have a Custom Sauer S404 fitted with a Sauer Titanium Moderator with an outside max. diameter of approx. 49.5mm. I have a Swarovski Z8i 2.3x18x56 scope mounted to it with the Sauer SUM mount. The scope is low and very close to the barrel, the moderator is visible through the scope at anything less than x15 magnification. Could you advise on the best mount for the scope so that the height above the barrel is correct and the full range of magnification can be used without the picture being obscured by the moderator. Thank you.

by Ken

We would kindly ask you to send images of your rifle's current mounting system to our info@optics-trade.eu so we can get a better visual interpretation to help you find a suitable mount.

by Optics Trade team

Video

To learn more, check out our videos on the selected product:

Posts

See related posts for your chosen product here:

ddddddddddddddddddd