Dentler Dural mount, 30 mm

Dear Sir,

thank you for contacting us.

First of all, Dentler mounts are top-of-the-line, and practically one of the best on the market. Considering the optics you will mount we have to specify that you shouldn't face any trouble in terms of height with the PST Gen II riflescope, however in the case of PARD, please note that with Dentler it will sit extremely high, especially with a mount for a Picatinny rail. 

If you wish, you can contact us directly at info@optics-trade.eu for greater details regarding these mounting options.

Kind Regards,

Dear Sir,

thank you for contacting us.

For a Pulsar Digex, you will require the highest possible Dentler mount in order to avoid the bottom part of the Digex (where the turrets are located) to touch the base on the Dentler. The windage should not vary that much in the case of hunting. Your product setup is correct, according to your description. 

Should you require any further assistance, please do not hesitate to contact us again at info@optics-trade.eu

Kind Regards,

Dear Sir, 

thank you for contacting us. 

Based on the data provided, you should be able to use the 12mm BH height without trouble. This would also be the lowest possible mounting option for the Dentler Dural mount. 

Should you need any further assistance, feel free to contact us anytime at info@optics-trade.eu 

Kind regards  

Dear Sir,

Thank you for your inquiry. We sincerely apologize for the delayed reply, which is a result of the increased demand for our services.

The difference between a dural mount and a steel mount is just in the material. In order to advise you whether or not this mount will fit on your Browning rifle, we kindly ask you to tell us which model of the rifle you have and for which caliber is it chambered.

Kind regards,

Dear Mr. Dusan,

thank you for contacting us.

We suggest you choose the 15 mm BH height.

Should you require any further assistance, please contact us at info@optics-trade.eu

Kind regards,

Dear Sir,

thank you for contacting us.

We recommend the BH 18mm.

Kind regards.

Dear Sir,

thank you for contacting us.

The Dentler mount that you are referring to has aluminum rings. We would suggest a BH height of 15 mm in order to work comfortably.

Should you require any further assistance, please do not hesitate to contact us again.

Kind Regards,

Dear Sir,

thank you for contacting us.

We would recommend you the 12mm BH height of the Dentler Dural mount, 30 mm. In order to mount the riflescope to your rifle, you also need a suitable base which you can find here: Dentler Base rail BASIS - Sako 85 L

Thank you for your understanding.

If you will need any additional information please do not hesitate to contact us again.

Kind Regards

This Dentler mount that you are referring to will still require a Dentler base for the Tikka T3 rifle in order to work. 

You can take a look at the base on the page below.

https://www.optics-trade.eu/en/dentler-base-rail-basis-tikka-t3.html

That is correct. This mount is suitable for the Dentler BASIS for Bergara Scout and BA13 models.

This mount includes the sub-base and two 30 mm rings. The BH height of your mount should be at least 14 mm in order to work comfortably, however since the sights will be on the rifle the BH height will need to be higher.

This product includes the rings and the sub-base.

In order to keep the iron sights, we would definitely advise the highest possible BH height for your configuration.