BRNO ZG 47

Sub Categories

Mounts

The History of Brno

The history of the Brno company or Czechoslovak Armory (Československá zbrojovka) as it was known prior to WWI, began in the city of Brno in the Czech Republic, formerly known as Czechoslovakia. In 1918, the Brno Rifles factory was established. Before 1918, Brno Plant was an arsenal located in the Austro-Hungarian Empire. Brno started producing Mauser 98 rifles in 1920 after buying excess weapons and equipment from Mauser-Oberndorf. These Brno-produced Mausers had a 98/22 designation stamped onto the receivers marking the year of production.

In the period between WWI and WWII, Brno collaborated with the Royal Small Arms Factory in Enfield, England to develop a well-known Bren light machine gun. They produced weapons for the Czechoslovakian and German armies during World War II. After the war, the company was nationalized by the Czechoslovakian government and renamed Zbrojovka Brno. While it was under socialist control until 1989, it switched to the production of sporting weapons which quickly gained a reputation for their reliability. For some time, the company also produced light artillery and several other products such as tractors, typewriters, and early computers.

During the years they presented numerous models of weaponry such as the ZB vz. 26 light machine gun, ZB-50 heavy machine gun, the MG34, several bolt action rifles, ZKM and ZH series, ZKR 551 handgun etc.

The company was privatized in 1990, just three years before Czechoslovakia split into the Czech Republic and Slovakia. Zbrojovka Brno was acquired by Česká zbrojovka (CZ) in 2008. With the new ownership, they agreed to a longer lease, which allows the business to continue production in rented facilities. They still make high-end products for hunting and competition, including pistols, single-shot and double rifles, combination rifles, as well as over/under shotguns.

Brno ZG 47 Rifle Review

The Brno ZG 47 is a bolt action rifle that was first introduced in the 1950s. It was produced until 1966/67, when it was replaced by the ZKK series. Despite its age, the ZG 47 remains a popular choice among shooters thanks to its reliable action based on the Mauser 98 design.

One notable feature of the ZG 47 is its forward rotating safety, which is positioned on the right side of the bolt shroud while the ZKK’s safety catch is attached to the receiver. This allows for easy access and use, making it a convenient feature for shooters. There were both standard and lightweight versions of the ZG 47 available, giving shooters the choice between a heavier or more portable rifle. In contrast to the ZKK, the trigger on the ZG 47 is only partially linked to the receiver.

One key difference between the ZG 47 and the ZKK series is in the sight system. The ZG 47 features a barrel-mounted backsight with screw adjustable windage, whereas the ZKK version is tapped from side to side. The ZG 47 also has a finer finish compared to any ZKK models, making it a more aesthetically pleasing choice for some shooters.

Both the ZG 47 and the ZKK models come with a replaceable bead foresight. The receiver is grooved for the standard 19 mm CZ mount meaning that the ZKK 600 one-piece mounts can also be used with the ZG 47 and the standard-length CZ 550. The bottom floorplate of the internal magazine is hinged and controlled by a latch on the inner side of the front trigger guard housing.

One standout feature of the ZG 47 is its finely tunable trigger mechanism, making it a popular choice for shooters looking for precise trigger control. Additionally, the rifle is equipped with a non-rotating extractor.

Brno ZG 47

Figure 1: Brno ZG 47, chambered for .30-06 Spr. (Source: https://www.dorleac-dorleac.com/arme/brno-zg47/?lang=en)

Brno ZG 47 Calibers

The rifle is chambered for the following calibers:

6.5x57
.270 Win.
7x57
7x64
.30-06 Spr.
8x57
8x60
8x64
9.3x62
10.75x68

Brno ZG 47 comes with milled 19 mm dovetail grooves at the top of the receiver which are suitable for installing scope mounts. The recoil notch is positioned on the left side of the rear mounting surface.

The receiver of Brno ZG 47

Figure 2: The receiver of Brno ZG 47, chambered for .30-06 Spr. (Source: https://www.dorleac-dorleac.com/arme/brno-zg47/?lang=en)

The mounting surface of Brno ZG 47

A: /

B: /

C: /

D: 19 mm

BHU: 0 mm

Ø: /

R1: Prisma 19

R2: Prisma 19

Scope Mounts Interchangeable With Brno ZG 47

Rifles That Have One-Piece Scope Mounts Interchangeable With Brno ZG 47

For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. Rifles that have one-piece mounts interchangeable with Brno ZG 47 are the following:

Brno CZ 537

Rifles That Have Two-Piece Scope Mounts Interchangeable With Brno ZG 47

For two-piece mounts to be interchangeable, the mounting surfaces of the rifle must match in every dimension except the action length which can vary. This is because of the distance between the two pieces of the mount which is not fixed. If the Scope mount comes with a recoil stopper that cannot be removed, it must match the position of the notch on the receiver. Rifles that have two-piece mounts interchangeable with Brno ZG 47 are the following:

Brno ZKK 601

Best Scope Mounts for Brno ZG 47

Fixed Scope Mounts for Brno ZG 47

These scope rings with bases are made by the German company MAK. They have a thirty-year warranty and are constructed of premium steel.

Detachable Repeatable Scope Mounts for Brno ZG 47

Installing detachable sight mounts on the rifle is quick and simple, making them particularly handy for maintenance. This two-piece repeatable pivot mount made by the German company EAW is a suitable choice for your Brno ZG 47.

Picatinny Rails for Brno ZG 47

If you are considering converting your 19 mm dovetail to Picatinny, this mounting solution might suit your needs. The Rusan Picatinny rail is made in Croatia and comes with a ten-year warranty.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the scope mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

In stock

Rusan Roll-off rings with extension, 19 mm rail, 30 mm, Q-R

As low as $115.00

View Product

BRNO ZG 47

Sub Categories

The History of Brno

Brno ZG 47 Rifle Review

Brno ZG 47 Calibers

Scope Mounts Interchangeable With Brno ZG 47

Rifles That Have One-Piece Scope Mounts Interchangeable With Brno ZG 47

Rifles That Have Two-Piece Scope Mounts Interchangeable With Brno ZG 47

Best Scope Mounts for Brno ZG 47

Fixed Scope Mounts for Brno ZG 47

Detachable Repeatable Scope Mounts for Brno ZG 47

Picatinny Rails for Brno ZG 47

Help Us Build Our Riflescope Mounts Database

Your wishlist