SIG Sauer 200 STR

Sub Categories

Mounts

Used

Sales

About the SIG Sauer

The story of Sauer & Sohn company began way back in the year 1751. The company was founded by Lorenz Sauer in the German city Suhl and until today it still lives up to its reputation as the oldest firearms manufacturing company in Germany. At its very beginnings, the company predominantly focused on producing firearms based on military contracts. The ‘Seven Years War’ in 1753 resulted in the company's first larger orders for the Prussian army.

Almost ninety years later, the eponymous grandson of Johann Paul Sauer started his business unit and around the same time, in 1839, the company changed its name to Spangenberg & Sauer. After the death of co-owner Ferdinand Spangenberg in 1873, Johann Paul Sauer, together with his sons Rudolf and Franz, took over the majority ownership of the company and re-named it to ‘J.P. Sauer & Sohn’. Soon after, the company reached its highest order to that point - approximately 150.000 rifles were produced for the German army. However, the number of military orders decreased severely in the following years, thus forcing the company to find new ways of expanding its market.

As the middle class grew, the demand for civilian arms production increased. The company knew how to exploit this economic situation and consequently presented its first SBS rifle in 1881, followed by the first catalogue which was released one year later. The innovativeness did not stop there – the company's success was at its very beginning, to say the least. As it grew, it began to gradually focus on hunting rifles. Thereupon, the first Sauer self-cocking drilling with a separate cocking lever for the ball lock was presented and launched in 1895. Twenty years later, the company presented the Sauer Meisterwerk XVIII shotgun that boasted sear, single trigger, ejector and engraving by Franz Schilling.

During the First World War, they mostly re-focused on military production and expanded its establishment along with the number of staff. However, the social and economic penury after the war, made the company struggle in the following years. To ensure its survival, the company started producing various products such as typewriters under the name Fortuna; for a short period, they also manufactured bikes. Due to the prohibition of military production, the construction of light hunting rifles was launched in 1930 with the triplet Mod. 30 and Mod. 30 L being introduced the same year and Mod. 32, Mod 32 L, Mod. 33 shortly after.

The shift in production happened again at the beginning of the Second World War when orders for military purposes firearms were increased. After the War, being deleted from the commercial register and under total soviet occupation, the company continued its production under different names - 'VEB FORTUNA Werk Suhl' and later 'VEB MEWA Ernst-Thälmann-Werke Suhl'. At that point, Rolf Sauer sold all company's rights to a group of industrialists in FRG. Nonetheless, the company still used its original name J.P. Sauer & Sohn for the production of hunting rifles years later. In 1951 J.P Sauer & Sohn GmbH was founded as the first hunting rifles manufacturer in FRG.

Soon after some of the most recognizable models were presented, such as Drilling Model 3000, which replaced the famous S53 Drilling, Model 80 bolt action rifle, Sauer 200 (the first modular action rifle in 14 calibres), the S 200 and Sauer 202.

After the year 2000, the ownership changed again when passionate hunters Michael Lüke and Thomas Ortmeier took over. At that turning point, the company shifted to focusing exclusively on the production of hunting rifles, presenting several popular models such as SAUER 303 self-loading rifle, SAUER 101, SAUER 202, SAUER 404, SAUER 404 Synchro XTC, SAUER 100, Sauer S 100, SAUER SL5 and SAUER101 Highland XTC. Nowadays, the brand's vivacious history and tradition of over 270 years result in quality and experience, thus offering an infallible choice for every hunting enthusiast.

SIG Sauer 200 STR Rifle Review

Introduced in 2009, SIG Sauer 200 STR is a push-feed bolt-action rifle that is broadly used for sport shooting purposes in Scandinavian countries. Being designed mostly for competition, it features a modular design that allows for easy dismantling of the rifle as well as effective switching between the barrels, chambering and different trigger groups. The receiver is made of single-piece steel and is based on the Sauer 200 receiver that was first introduced in 1985.

The action houses a bolt with six locking lugs that lock into the barrel which contributes to the strength and safety of the rifle. The barrels are made of chromium molybdenum and are steel-hammer-forged. SIG Sauer 200 STR features a box magazine that can hold up to five rounds and a two-stage trigger that is pull-adjustable. Additionally, the length, horizontal and vertical pitch can also be adjusted allowing for a personalized shooting experience.

The manual safety lever is placed on either the right or left side above the handle and comes with a visible indicator at the rear of the receiver that shows when the rifle is ready to fire. The cheekpiece and shoulder pad on the stock of the rifle are adjustable allowing the shooter to fine-tune the stock to their preferences. The rifle comes equipped with a factory dioptre that is mounted to the dovetail surface and globe sighting line.

Possible barrel lengths for SIG Sauer 200 STR are 670 mm (26.4-inch), 700 mm (27.6-inch) and 740 mm (29.1-inch).

Sauer 300 STR

Figure 1: Sauer 200 STR, chambered for .308 Win. (Source: https://i.pinimg.com/736x/35/52/00/355200adbe8b5848abc4e52a8e52008b.jpg)

SIG Sauer 200 STR can be chambered for the following calibres:

.22 LR
6.5x55 SE
.308 Win.
7.62×51mm NATO

All SIG Sauer 200 STR receivers come with two holes on the front and a dovetail placed along the rear mounting surface.

Sauer 300 STR

Figure 2: The receiver of Sauer 200 STR, chambered for .308 Win. (Source: https://www.lauritz.com/en/auction/sauer-str-200-bane-riffel-kaliber-308-win/i5591893/)

Calibre choice depends on the variant.

The rifle is available in the following variants:

STR 200 Recruit
STR 200 Junior
STR 200 Match

A: 22 mm
B: /
C: /
D: 11 mm (only the back part of the Picatinny rail)
BHU: /
Ø: /
R1: /
R2: /

Which Rifles Have Interchangeable Mounts

Two-piece mounts

For two-piece mounts to fit on a rifle, mounting surfaces must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart.

Unfortunately, we currently lack information regarding two-piece interchangeable mounts for the SIG Sauer 200 STR rifle as it features a specific mounting surface. Should you have any additional information regarding possible mount matches, please contact us. We would gladly accept your help and expand our database accordingly.

One-piece mounts

All the rifles listed in the category below have one-piece mounts interchangeable with Sauer 200 STR. For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. The rifle that shares the same dimensions and mounting surface with SIG Sauer 200 STR is:

SSG 3000

Our Recommendations for Mounts

Picatinny Rails

This Picatinny rail manufactured by the German company EAW is made of steel and is suitable for Sauer 200 STR. Being one of the most versatile mounting solutions on the market, it will provide the user with numerous mounting possibilities. It comes with a thirty-year warranty.

Help us build our riflescope mounts database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

Recknagel Picatinny rail for 11 mm dovetail

ERA-TAC fixed Picatinny rail for 11 mm dovetail

$115.00

SIG Sauer 200 STR

Sub Categories

About the SIG Sauer

SIG Sauer 200 STR Rifle Review

SIG Sauer 200 STR can be chambered for the following calibres:

Which Rifles Have Interchangeable Mounts

Two-piece mounts

One-piece mounts

Our Recommendations for Mounts

Picatinny Rails

Help us build our riflescope mounts database

Your wishlist