Rifle scopes with Zeiss ZM/VM mounting rail

VIDEO

Introduction

Among other manufacturers who started offering railed scopes on the market, Zeiss is definitely one of the most known. In company of other premium European manufacturers of railed rifle scopes, Zeiss chose its own path with their own ZM/VM mounting rail. This rail was invented in 1990 which means that is in use for a very long period of time. This also means that their rail standard was one of the first if not the first one to replace very well known LM rail standard. Comparing an old LM rail with the ZM/VM rail, the solution from Zeiss does not require any drilling which is a huge advantage for the user besides nicer aesthetics.

The ZM/VM rail is also known as

"Zeiss rail",
"inner rail" or
"M rail" (Zeiss basically put a letter "M" to all of their scopes with integrated rails and therefore, you can always know that you are dealing at a railed Zeiss scope if there is letter "M" involved in the model name).

It is important to know that ZM/VM rail standard is used by many brands nowadays, not only Zeiss.

Zeiss Conquest V6 1.1-6x24

Properties of Zeiss ZM/VM Rail standard

Rifle scopes that are made for using a ZM/VM rail mounting solutions, have an internal dovetail rail on the bottom part of the scope. In this rail there are at least two wedge nuts, milled under 45° angle that are able to slide along the rail (and reach different positions). The scope mount can be attached to these wedge nuts with a use of torx, allen or hex key.

ZM/VM rail mounts normally reach the height between 7-9 mm (for hunting rifles), but can also be higher (up to 23 mm) for modern AR rifles.

Drawing of scopes

Drawing of scopes with (left) and without (right) Zeiss rail, both connected with Picatinny interface

(source: https://en.wikipedia.org/wiki/Zeiss_rail)

Pros

It is somehow strange that rail mounting of rifle scopes is not more popular or at least as common as mounting with rings. In majority of cases, rail mounting is far better solution. One of the main reasons for it is that using rails offers better stability of the rifle scopes. Such mounts deal with recoil much better, also because of their robustness and reliability. There is no stress or tension provided to the scope tube while mounting or after mounting during the normal lifetime of the equipment.

We should not forget to mention that perfect horizontal alignment between the scope and the rifle is always achieved. There are no subjective factors during reaching horizontal alignment, because everything is already there and prepared for you. You just have to tighten the screws and the scope will be horizontally aligned, perfectly. If you will ever think about changing the scope or putting your old one on the other rifle, there will be no mounting marks on the scope. Sliding the scope on its rail forward or backwards, usually means that it is also quite easier to adjust the perfect eye relief.

Cons

There are really not a lot of disadvantages when using a ZM/VM rail. We have to mention that in some configurations, the setup can be a little high, compared to the same setup using mounting rings. Also, the truth is that German rail solutions are not the cheapest ones.

Brands that use this rail standard

Nowadays, ZM/VM rails are produced also by other European manufacturers besides Zeiss. Let us show you the list of some of the most recognized manufacturers:

Leica,
Steiner,
Noblex,
Meopta,
Blaser,
Schmidt&Bender (only in some of their scopes),
Minox,
Kaps and
Nikon.

These are all the brands that found sense in adopting the ZM/VM rail standard for their scopes. Knowing that all these well reputed brands using the same rail standard from Zeiss, it looks quite promising, right?

Blaser Infinity 2.8-20x50

Conclusion

The reputation of ZM/VM rail is well deserved and probably this is so because we are talking about one of the best and most common rail standards available. We also (always) recommend that if you are in a situation when you can choose between mounting rings or mounting rail, you should always choose rail. All of the advantages are definitely worth it.

Filters

Sort

In stock

Steiner Ranger 4 1-4x24

Ask for price

View Product

Add to compare

In stock

Zeiss Victory V8 1.1-8x24

Ask for price

View Product

Add to compare

In stock

Leica Magnus 1-6.3x24 i

Ask for price

View Product

Add to compare

Zeiss Conquest V6 1.1-6x24

Ask for price

View Product

Add to compare

In stock

Leica Fortis 6 1-6x24i

Ask for price

View Product

Add to compare

In stock

Blaser Infinity 1-7x28

Ask for price

View Product

Add to compare

Filters

Sort

VIDEO

Wide-angle riflescopes are built to offer the widest possible field of view for rapid target acquisition. Such scopes are used for close range shooting on driven hunts, while stalking, on dynamic shooting competitions or in close quarter tactical situations. Many of the wide-angle riflescopes also offer the option to use both eyes open when aiming and in this way have an unlimited field of view. Illuminated reticle gives further advantage to the shooter in fast target acquisition; however, such illumination has to be in bright daytime. Common features of wide-angle scopes are:

Magnification of 1.0x (or 1.1x as less ideal)
Field of view greater than 35m/100m
Illuminated reticle with daytime intensity
30 mm tube diameter (hunting models can be mounted with rails)
4, 5, 6, 8 or 10 zoom factor
Capped or tactical turrets
• Parallax fixed at 100m

Rifle scopes with Zeiss ZM/VM mounting rail

VIDEO

Introduction

Properties of Zeiss ZM/VM Rail standard

Pros

Cons

Brands that use this rail standard

Conclusion

Steiner Ranger 4 1-4x24

Zeiss Victory V8 1.1-8x24

Leica Magnus 1-6.3x24 i

Zeiss Conquest V6 1.1-6x24

Leica Fortis 6 1-6x24i

Blaser Infinity 1-7x28

VIDEO

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Rifle scopes with Zeiss ZM/VM mounting rail

VIDEO

Introduction

Properties of Zeiss ZM/VM Rail standard

Pros

Cons

Brands that use this rail standard

Conclusion

VIDEO

Your wishlist