Remington 6

About the Remington

The company was founded in 1816 when Eliphalet Remington II handcrafted his first rifle in his father’s forge and with the help of a local gunsmith managed to turn it into a simple flintlock rifle for his personal use. Taking second place in a shooting contest, Remington's rifle attracted a great amount of attention and shortly after, first orders started to come in.

The production line was moved to the Erie Canal which is nowadays known as the present location of the Remington factory in Ilion, New York. Early on, the company manufactured around 5000 pieces of M1841 Mississippi rifles to be used in the U.S. army additionally receiving a large government order of 1000 Jenks loading carbines. A few years after establishing its first armoury in 1848, three of the founder's sons joined the company and renamed it, E. Remington & Sons. The following years brought the outbreak of the Civil War in 1861 and at that point the company was supplying the Federal Army and Navy with arms such as pistols, carbines, rifles, and muskets, increasing their production rate significantly. Eliphalet Remington passed away in the same year, leaving the business up to his three sons. The army-oriented production shifted in direction again at the end of the War in 1865 when the company started to fabricate different firearms for civilian hunting and shooting sports. In 1871, the company established its ammunition production under the name Remington Ammunition Works. They were producing centrefire ammunition for pistols, shotguns, and rifles. Two years later, after gaining the trust of inventors Christopher Sholes and Carlos Glidden, the company even managed to produce its first fully functional typewriter in Ilion, New York.

In the following years, the company presented some of its early weapon models such as the first American autoloader (later known as M11), Model 8, and Model 10. At the beginning of World War I, Remington enlarged their facilities, expanding out to four locations, increasing arms and ammunition production rate once again. Signal guns, autoloading pistols such as Model 51, rifles and machine guns were swiftly being produced in great numbers. In addition, they entered a cutlery business during the war period, producing roughly 2.500.000 knives annually by the year 1926. Remington was revolutionizing its products every step of the way. Being the first to introduce the concept of game load ammunition, they took over the shotshell industry by storm. Ammunition production increased again in World War II when the company expanded its production to 7 more locations. Some of the most recognizable weapon models were presented during this period such as Model 03A4 or M1903A3 Springfield which was a renewed and simplified version of 1903 Springfield.

In the years after the war, they released the Model 870 'Wingmaster’ shotgun which became the world’s bestseller at that point, Nylon 66 autoloading .22 rifle, Model 700 bolt-action rifle, Model 1100 and an M24 sniper rifle that was regularly used as a standardized US army sniper rifle until 2010. Meanwhile, they also managed to stay operative in the knife making business. Ten years after building a new ammunition plant in Lonoke, Ark., DuPont purchased the remaining Remington shares and became the majority owner of the company, however, they later sold the assets to RACI Acquisitions in New York. In 2011 they re-focused on the production of handguns, launching the R1 1911 semi-automatic pistol. Another renowned weapon, namely the Model 783 bolt-action rifle was released two years later, in 2013.

Today, Remington is known as the oldest gun manufacturer in America, celebrating a more than 200-year-old history of diligence and quality.

Remington Model 6 Rifle Review

Remington Model 6 is a pump-action rifle that succeeded Remington 760 and was manufactured from 1981 until 1987. It comes with a box-like magazine that can hold up to four rounds and an ejection slot placed on the right side of the steel receiver which is factory drilled and tapped for various mounting solutions.

The rifle features a front locking rotary bolt and twin-action bars that allow for quick follow-up shots and smooth operation altogether. The fourteen locking lugs of the previous model were replaced by four larger ones. The cross-bolt safety mechanism is positioned behind the trigger guard and comes with a red/white dot indicator that shows whether the system is engaged. Model 6 features a pre-set trigger that is optimized for a smooth shooting experience.

Eventually, the Model 6 designation was dropped, and Remington started referring to the rifle as Model 7600. The possible barrel length for Remington Model 6 is 559 mm (22-inch).

Remington 6

Figure 1: Remington Model 6, chambered for .30-06 Spr. (Source: https://www.gunsamerica.com/940392445/Remington-Model-6-30-06.htm)

Remington Model 6 can be chambered for the following calibres:

.243 Win.
6mm Rem.
.270 Win.
.308 Win.
.30-06 Spr.

The rifle is available in the following variants:

Remington Model 6 Peerless
Remington Model 6 Premium

All Remington Model 6 receivers come with four holes for mounting purposes, two on the front and two on the rear mounting surface.

Remington 6

Figure 2: The receiver of Remington Model 6, chambered for .30-06 Spr. (Source: https://www.gunsinternational.com/guns-for-sale-online/rifles/remington-rifles/remington-model-six----30-06.cfm?gun_id=100749554)

Remington 6

A: 21.9 mm
B: 52.1 mm
C: 15.3 mm
BHU: 0 mm
Ø: 8-40
R1: R15.7
R2:R15.7

Which Rifles Have Interchangeable Mounts

Two-piece mounts

All the rifles listed in the category below have two-piece mounts interchangeable with Remington Model 6. To meet interchangeability conditions, two-piece mounts must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. Rifles that meet such criteria are:

Remington 74
Remington 76
Remington 750
Remington 7400
Remington 7500
Remington 7600
Remington 7615
Remington Model Four

One-piece mounts

All the rifles listed in the category below have one-piece mounts interchangeable with Remington Model 6. For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. Rifles that share the same dimensions and mounting surface with Remington Model 6 are:

Remington 74
Remington 76
Remington 750
Remington 7400
Remington 7500
Remington 7600
Remington 7615
Remington Model Four

Our Recommendations for Mounts

Fixed Mounts

Manufactured by the German company MAK, this two-piece mounting solution consisting of rings with bases is made of steel and offers a reliable choice among fixed mounts for your Remington Model 6. It can withstand the recoil of the most powerful calibres and comes with a thirty-year warranty.

Detachable Repeatable Mounts

If you are planning on using multiple optics on the same rifle, you ought to be looking for a detachable mounting solution. This two-piece steel pivot mount made in Croatia by the company Rusan will fit your Remington Model 6 perfectly. It is repeatable and comes with a ten-year warranty.

Picatinny Rails

When it comes to the reliability and variability of mounting solutions, Picatinny rails are among the best choices on the market. They consist of slots with 5.23 mm spaces between one another, which means that they can be used across their entire length. This Picatinny rail produced by the German company EAW is made of steel comes with a thirty-year warranty and will fit perfectly on the receiver of Remington Model 6.

Help us build our riflescope mounts database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

INNOmount Zeiss ZM/VM Rail Pivot Mount, Remington 750/740/742/760

Ask for price

View Product

Add to compare

Filters

Sort

Remington 6

About the Remington

Remington Model 6 Rifle Review

Which Rifles Have Interchangeable Mounts

Two-piece mounts

One-piece mounts

Our Recommendations for Mounts

Fixed Mounts

Detachable Repeatable Mounts

Picatinny Rails

Help us build our riflescope mounts database

INNOmount Zeiss ZM/VM Rail Pivot Mount, Remington 750/740/742/760

VIDEO

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Remington 6

About the Remington

Remington Model 6 Rifle Review

Which Rifles Have Interchangeable Mounts

Two-piece mounts

One-piece mounts

Our Recommendations for Mounts

Fixed Mounts

Detachable Repeatable Mounts

Picatinny Rails

Help us build our riflescope mounts database

INNOmount Zeiss ZM/VM Rail Pivot Mount, Remington 750/740/742/760

VIDEO

Your wishlist