Close

Remington 78 LA

Sub Categories

Picatinny Rails
Fixed Mounts
Detachable Mounts
Red Dot Sights Mounts
NV & Thermal Mounts

About the Remington

The company was founded in 1816 when Eliphalet Remington II handcrafted his first rifle in his father’s forge and with the help of a local gunsmith managed to turn it into a simple flintlock rifle for his personal use. Taking second place in a shooting contest, Remington's rifle attracted a great amount of attention and shortly after, first orders started to come in.

The production line was moved to the Erie Canal which is nowadays known as the present location of the Remington factory in Ilion, New York. Early on, the company manufactured around 5000 pieces of M1841 Mississippi rifles to be used in the U.S. army additionally receiving a large government order of 1000 Jenks loading carbines. A few years after establishing its first armoury in 1848, three of the founder's sons joined the company and renamed it, E. Remington & Sons. The following years brought the outbreak of the Civil War in 1861 and at that point the company was supplying the Federal Army and Navy with arms such as pistols, carbines, rifles, and muskets, increasing their production rate significantly. Eliphalet Remington passed away in the same year, leaving the business up to his three sons. The army-oriented production shifted in direction again at the end of the War in 1865 when the company started to fabricate different firearms for civilian hunting and shooting sports. In 1871, the company established its ammunition production under the name Remington Ammunition Works. They were producing centrefire ammunition for pistols, shotguns, and rifles. Two years later, after gaining the trust of inventors Christopher Sholes and Carlos Glidden, the company even managed to produce its first fully functional typewriter in Ilion, New York.

In the following years, the company presented some of its early weapon models such as the first American autoloader (later known as M11), Model 8, and Model 10. At the beginning of World War I, Remington enlarged their facilities, expanding out to four locations, increasing arms and ammunition production rate once again. Signal guns, autoloading pistols such as Model 51, rifles and machine guns were swiftly being produced in great numbers. In addition, they entered a cutlery business during the war period, producing roughly 2.500.000 knives annually by the year 1926. Remington was revolutionizing its products every step of the way. Being the first to introduce the concept of game load ammunition, they took over the shotshell industry by storm. Ammunition production increased again in World War II when the company expanded its production to 7 more locations. Some of the most recognizable weapon models were presented during this period such as Model 03A4 or M1903A3 Springfield which was a renewed and simplified version of 1903 Springfield.

In the years after the war, they released the Model 870 'Wingmaster’ shotgun which became the world’s bestseller at that point, Nylon 66 autoloading .22 rifle, Model 700 bolt-action rifle, Model 1100 and an M24 sniper rifle that was regularly used as a standardized US army sniper rifle until 2010. Meanwhile, they also managed to stay operative in the knife making business. Ten years after building a new ammunition plant in Lonoke, Ark., DuPont purchased the remaining Remington shares and became the majority owner of the company, however, they later sold the assets to RACI Acquisitions in New York. In 2011 they re-focused on the production of handguns, launching the R1 1911 semi-automatic pistol. Another renowned weapon, namely the Model 783 bolt-action rifle was released two years later, in 2013.

Today, Remington is known as the oldest gun manufacturer in America, celebrating a more than 200-year-old history of diligence and quality.

Remington 78 LA Rifle Review

Remington 78 LA is a push-feed bolt action rifle that was manufactured from 1978 until 1982. It features the same action as the Remington 700 LA; however, it comes without a jewelled bolt body, gloss finish and some other premium touches. Structurally it remains the same as model 700 LA with dual locking lugs that lock up safely into the housing of the receiver and a two-position safety catch positioned on the upper right side of the receiver.

The rifle comes with an adjustable trigger that is smooth to operate and a floor plate magazine that can hold three to six rounds. The barrel and the receiver are both made from high-quality steel.  Remington 78 is available in two action sizes, namely long action, and short action.

Possible barrel lengths for Remington 78 LA are 559 mm (22-inch) and 610 mm (24-inch).

 Remington 78 LA

Figure 1: Remington 78 LA, chambered for .30-06 Spr. (Source: https://www.gunbroker.com/item/915262773)

Remington 78 LA can be chambered for the following calibres:

  •  .220 Swift

  • 6mm Rem.

  • .25-06 Rem.

  • .270 Win.

  • 7mm Rem. Mag.

  • .280 Rem.

  • 7mm RUM

  • .30-06 Spr.

  • .300 Win. Mag.

  • .300 RUM

  • .338 Win. Mag.

  • .338 RUM

  • .35 Whelen

  • .375 H&H Mag.

  • .375 RUM      

All Remington 78 LA receivers come with four holes for mounting purposes, two on the front and two on the rear mounting surface.

 The receiver of Remington 78 LA

Figure 2: The receiver of Remington 78 LA, chambered for .30-06 Spr. (Source: https://www.gunbroker.com/item/915262773)

Skica dimenzij

A: 21.9 mm

B: 113.9 mm

C: 15.3 mm

BHU: 2.9 mm

Ø: 6-48

R1: R51

R2: R17

Which Rifles Have Interchangeable Mounts

Two-piece mounts

All the rifles listed in the category below have two-piece mounts interchangeable with Remington 78 LA. To meet interchangeability conditions, two-piece mounts must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. Rifles that meet such criteria are:

  • Bergara B14 SA

  • Bergara Premier rifles – SA

  • Bergara B14 LA

  • Bergara Premier rifle s – LA

  • Remington 78 LA

  • Remington 700 SA

  • Remington 700 LA

  • Remington 722

  • Remington 40x SA

  • Remington 721

  • Remington 725

  • Remington 40x LA

  • Mauser M18

  • Mauser M94

  • Mauser 1996 (Serial number < 12000)

  • Haenel Jaeger 10

  • Sauer 100

  • Sauer 101

  • Howa 1500 LA

  • Howa 1500 SA

  • Howa 1500 mini

  • Remington 40-XB 

  • Mauser M12 (2019-onward)

One-piece mounts

All the rifles listed in the category below have one-piece mounts interchangeable with Remington 78 LA. For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. Rifles that share the same dimensions and mounting surface with Remington 78 LA are:

  • Bergara B14 LA

  • Bergara Premier rifles – LA

  • Remington 721

  • Remington 725

  • Remington 40x LA

  • Haenel Jaeger 10

  • Sauer 101

  • Sauer 100

  • Mauser M18

  • Howa 1500 LA

  • Remington 700 LA

  • Mauser M12 (2019-onward)

Our Recommendations for Mounts

Fixed Mounts

If you are planning on using one scope on the same rifle, this two-piece aluminium mounting solution manufactured by the American company Talley is one of the most suitable choices for your Remington 78 LA. The mount is durable and can stand up to the most powerful cartridges.

Detachable Repeatable Mounts

Along with their practicality, detachable mounts also allow for dependable repeatability and recoil resistance. If you are in search of such a mounting solution, we recommend this Rusan swing mount. It is made of high-quality steel and comes with a 10-year warranty.

Picatinny Rails

Along with being rigid and recoil resistant, Picatinny rails are renowned for the number of mounting options they offer. This steel Picatinny made by the Croatian company Rusan comes with a ten-year warranty and will fit perfectly on the mounting surface of your Remington 78 LA.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu 

Filters
Sort
Items 1-100 of 769
Show
per page
Close
Sort By
Filters
Sort
Items 1-100 of 769
Show
per page
Close
Sort By

VIDEO