Now Shopping by

Mounts Fashion
One-Piece Mount

Clear All

Single piece scope mounts

Introduction

The most important fact that is in common with all single piece scope mounts is that the both scope rings share one piece of material.

The whole mount is made of one piece of raw material and common process to make mount of it is milling.

Single piece scope mounts are usually made for tactical applications and are most suitable for use on Picatinny rails. Although, there are some manufacturers on the market which make elegant one piece mounts for hunting applications, such as:

Spuhr,
ERA-TAC Ultralight etc.

Besides Picatinny rails, there are other rail standards that are also common with this design of scope mounts, for example:

11 mm – Al
5 mm – Tikka, Sako TRG
19 mm – CZ 550

These type of mounts are usually made from high quality aluminium and can be either quick detachable or fixed.

Two groups of Single piece scope mounts for different purposes

FOR HUNTING RIFLES

These mounts can be found for more modern rifles, because decades ago they were not available yet. Even though we can find these mounts with great, elegant shapes (like Blaser, Sauer, Innomount and other mounts, for example), they are not that much popular with other, cheaper manufacturers.

These mounts are quite expensive and therefore they can be mostly found on modern rifles of higher price levels.

FOR TACTICAL RIFLES

Single piece scope mounts for tactical rifles are nearly perfect. It is probably the best way to mount a scope with enough rigidness, hardness, durability, reliability and precision. On the other hand, these scope mounts are normally expensive.

PROS

One of the most important advantages of single piece scope mounts is perfect ring alignment. Therefore, normally you will not flex or damage the scope with this kind of mount.

The user also gets a bigger contact surface between the scope and the mount, which is a favourable factor. One of great things with these scope mounts is that there is no lapping needed.

CONS

If you are an aesthetic freak, you might not be too happy with these mounts. They usually have the bulky appearance and bigger mass. If you can live with that, you will be just fine with the choice.

Although, you have to be prepared to pay somewhat bigger price because they are normally more expensive. Also, there is the less adjustable length for proper eye relief.

Is lapping still advisable with one piece scope mounts?

There is no need for lapping at all. You will not gain anything with it, because these scope mounts are made of one piece of material, which means perfect alignment. Of course, the mount has to be made as it should be – proper quality during manufacturing is needed.

If the quality of the production process and design is not good enough, there might be problems with such mounts. Not only that lapping is normally not needed, but there is also no need for bedding, which is also a great advantage.

Single piece mounts with an inclination

Single piece scope mounts are the most common mount form with inclination. The inclination is usually 20 MOA. Of course, matched rings are needed; they should not be mixed, otherwise, we lose this great option.

These type of mounts are great for long-range shooting because they offer whole new possibilities for long-range shooters.

Conclusion

Single piece scope mounts are great mounts because of the perfect ring alignment, rigidness and so on.

They are normally quite bulky, which might be the reason (in addition to expensive prices) that they are not so much popular on hunting rifles (except original mounts from hunting rifles manufacturers which can be very elegant and good looking – Blaser mount, Sauer mount, etc.) as they are on sport and tactical rifles. Lapping or bedding are normally not needed, which are just two more factors why they are great mounts.

Normally, if you like the appearance, you cannot go wrong with these type of mounts.

Filters

Sort

Sig Sauer Alpha2 Red Dot Mount 34 mm

Ask for price

View Product

Add to compare

Sig Sauer Alpha2 Red Dot Mount 30 mm

Ask for price

View Product

Add to compare

Filters

Sort

VIDEO

Combined use of a riflescope and a red dot sight

Riflescopes magnify images, allowing the shooter to carefully inspect the target, while a red dot sight quick target acquisition when shooting at short distances.

In this category, there are mounts that allow the use of a riflescope and a red dot sight in a single setup.

Advantages of combined use of two optical devices

The hunter is prepared to take an accurate shot in all possible situations.
At close range, a red dot sight is used, while the riflescope proves useful at long-range distances.
Using a red dot and a riflescope in a single setup is less expensive than purchasing two, 100% repeatable mounting solutions for each optical device.

Most mounts found in this category are either rings or parts of rings with an integrated red dot sight mounting standard. The standard is specified in the mount’s name – mostly, one of the familiar red dot mounting standards is listed such as Docter Sight, Aimpoint Micro, C-more RTS, Shield RMS/SMS, Trijicon RMR.

Some manufacturers, such as Spuhr and Recknagel, provide rings with an interface that is then further paired with an adapter plate.

How to mount a red dot sight on a riflescope

There are two ways of mounting a red dot sight on a scope tube:

on top of the riflescope or
on the side, at a 45° angle.

Red dot mounts on a scope tube

Red dot sight mounted on a 45° angle and on top

Even though the mounting style depends on the user preference, having a red dot sight mounted on top of a riflescope is generally more popular among hunters.

IPSC shooters, for example, generally prefer to have the red dot sight mounted at a 45° angle.

Red dot mounts for a scope tube are almost exclusively made from aluminium.

They are produced by:

Spuhr,
Recknagel,
Henneberger,
Shield, and
many others.

Single piece scope mounts

Introduction

Besides Picatinny rails, there are other rail standards that are also common with this design of scope mounts, for example:

Two groups of Single piece scope mounts for different purposes

PROS

CONS

Is lapping still advisable with one piece scope mounts?

Single piece mounts with an inclination

Conclusion

Sig Sauer Alpha2 Red Dot Mount 34 mm

Sig Sauer Alpha2 Red Dot Mount 30 mm

VIDEO

Advantages of combined use of two optical devices

How to mount a red dot sight on a riflescope

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Single piece scope mounts

Introduction

Besides Picatinny rails, there are other rail standards that are also common with this design of scope mounts, for example:

Two groups of Single piece scope mounts for different purposes

PROS

CONS

Is lapping still advisable with one piece scope mounts?

Single piece mounts with an inclination

Conclusion

Sig Sauer Alpha2 Red Dot Mount 34 mm

Sig Sauer Alpha2 Red Dot Mount 30 mm

VIDEO

Advantages of combined use of two optical devices

How to mount a red dot sight on a riflescope

Your wishlist