CZ 600 Ergo (Long)

Sub Categories

Clip-On Adapters for Pulsar Krypton (M35x1.0)

About the CZ

CZ firearms or CZ (which stands for Česká zbrojovka) is based in Uhersky Brod, a small town in the southeastern Czech Republic. CZ has its start in 1936 as a subsidiary of CZ Strakonice, which was itself a subsidiary of Zbrojovka Brno. The arms industry was growing quickly in Czechoslovakia at the time, and Uhersky Brod was chosen since it was secluded and lay beyond the range of German bombers, which, in case of an invasion, would target the arms factories first. The factory initially mostly produced pistols and small-caliber rifles; however, when German forces occupied Czechoslovakia in 1939, the company was renamed to Böhmische Waffenwerke and was forced to make machine guns, such as LK-30 and MG-17, for the German military.

After the end of World War II, the Soviets gained control of the region and the company was nationalized by the communist government, producing air weapons, machine guns, submachine guns, motorcycle and sewing machine parts. In 1957 the company started production of the Model 58, and in 1961 they introduced the world-famous Model 61 Škorpion machine pistol. The year 1975 marked the release of yet another popular model, the CZ 75 pistol which many manufacturers have since used as basis for their own products.

CZ once again became an independent company in 1992 following the fall of the Soviet Union. In the decades after, they have continued production of a variety of weapons seizing the market of law enforcement and military firearms with service pistols, assault rifles and grenade launchers with which they also helped equip the Czech army. They have strived to widen their presence on the international markets, opening a facility for assembly and repairs of CZ pistols in Peru and spreading production of their firearms (certain models of the CZ-P10 pistol) to the United States in 2019. As of 2021 they employed around 1500 workers.

CZ 600 Ergo (Long) Rifle Review

CZ 600 is a centerfire bolt-action rifle introduced in 2021 to replace CZ’s entire centerfire line. CZ 600 is a highly modular rifle made so by the interchangeable barrel design where the barrel slides into the receiver and locks into the action with three set screws which makes it easy to remove without the help of a gunsmith. The bolt locks directly into the barrel where there are 3 locking lugs (6 on the magnum action models). The safety is a special vertical plunger design – it consists of a button located at the top tang position which goes up and down through the tang when pushed. Fire mode is activated by pushing the safety down with your thumb and pushing up with your trigger finger activates the safe mode. The feeding system is a controlled-round feed with a short extractor. Loading is possible either through the top of the action or through the magazine. By opening the bolt slowly, the case can be dropped nearby or inside the receiver, whereas opening it quickly can send the case flying away. A single-stage trigger is featured on all variants (except the CZ 600 Trail).

CZ 600 Ergo comes in three action lengths: mini, medium and long. It features an aluminum receiver and a polymer stock.

Figure 1: CZ 600 Ergo. Source: https://www.czub.cz/en/firearms-and-products-product/cz-600-ergo

CZ 600 Ergo (Long) is chambered for the following calibers:

.30-06 Spr.
.300 Win. Mag.
8x57 JS

CZ 600 Ergo features a separated Picatinny rail.

CZ 600 Ergo (long) receiver

Figure 2: CZ 600 Ergo (long) receiver

Which rifles have interchangeable mounts

Two-piece mounts

This rifle has two-piece mounts interchangeable with every rifle that has an integrated Picatinny rail.

One-piece mounts

Information not yet available because the action lengths are not known at the moment.

Our recommendations for mounts

Fixed mounts

We recommend these Picatinny fixed rings from Tier-One. They are relatively affordable and made of aluminum, same as the rifle's receiver.

Detachable repeatable mounts

We recommend this EAW QD roll-off mount since it offers great reliability and is made of the same material as the rifle's receiver - aluminum.

Help us build our riflescope mounts database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

In stock

Pulsar PSP-V Weaver Rail Adapter

Ask for price

View Product

Add to compare

Filters

Sort

VIDEO

Check out our article on Clip-on Adapters Mounting Standards

Nowadays, modern hunting requires modern equipment. It is believed that clear image while observing wildlife before making decisions or taking the shot, is crucial. If we want to be humane/ethical and make right decisions for wildlife, we have to observe properly and have a perfect view of the animal for two reasons: choosing the right animal and taking a clean shot. This is much harder to achieve in low light conditions or during the night, therefore there are some effective options on the market: night vision, digital night vision and thermal imaging attachments (so called clip-on devices). Night vision attachments are known for decades. They were invented for military purposes, but commercial market accepted them with excitement when it became possible to buy them. In recent times, thermal imaging clip-on are becoming more and more popular and there are many reasons for that.

Rusan Q-R one-piece adapter for Pulsar Krypton

Rusan Q-R one-piece adapter for Pulsar Krypton

Main advantages of thermal imaging over the night vision possibilities

Long detection range
Effective in wooden areas (seeing through bushes);
Good image in fog or heavy rain;
Not sensitive to daylight
Does not require an additional light source.

Night Vision Optics comparing to Thermal imaging

However, affordable night vision optics can be found on the market and they still have some advantages, comparing to thermal imaging:

Realistic image with good resolution;
Seeing details on animals (also at longer ranges);
Higher optical magnification.

When we are talking about night vision or thermal imaging, we can either talk about goggles and monoculars for observing or night / thermal scopes and clip-on systems, meant for installation on rifles. To be exact, clip on systems are meant for attaching to the riflescopes on rifles. The most convenient of all solutions on rifles are definitely clip on scopes (either night vision or thermal imaging – depends on the need). With this solutions, there is no need for switching scopes, you just have to attach clip on scope when needed. There is also no need for re-zeroing your riflescope when attaching or detaching clip on scope on it.

PARD NV007 Adapter

PARD NV007 Adapter

Adapters for Dedal clip-on attachments

Dedal is probably the most known name when talking night vision clip ons. It is so well known that most of the other producers of clip on mounts and night vision / thermal imaging products use their connection standard.

Dedal night vision devices (models 541, 552) directly fit to Swarovski 50mm scopes. Swarovski’s inner thread in front of objective lens is the same as on Dedal devices (M52/37). The length of thread is 10 mm and this is the most known connection standard (made by Dedal and used by all others). If you are using different Scope with different thread and diameter, adapters are needed.

Adapters for Pulsar Core clip-on attachments

Over the years, Pulsar became more and more successful with their thermal imaging products and today there are also very popular their mounting standards for clip on devices: Pulsar Core standard and Pulsar Forward standard.

Pulsar Core mounting standard was first introduced with their DFA75 model and later became known all on Core models. The original Pulsar adapter is produced in three different dimensions (42, 50 and 56 mm). If you have rifle scopes of different dimensions, Rusan and Smartclip, both provide adapters for Pulsar from 30 to 80 mm. Sadly, original Pulsar adapters are quite thick and if you want more elegant design, you can pick a Smartclip or Rusan adapter. All these Pulsar Core adapters use two pins (or clips) which is the main difference, compared to Pulsar Forward adapters that use four pins.

Rusan Q-R adapter for Dedal 540-552, Jahnke, Lahoux

Rusan Q-R adapter for Dedal 540-552, Jahnke, Lahoux

Adapters for Pulsar Forward clip-on attachments

Pulsar Forward standard was introduced for use on their F155 / F135 clip on models and stayed on the market for their newer F455 model. It is different from Core adapters, because it uses four pins. You could also use two pin Core adapter on F155 / F135 models, however it will not be as fix as with adapter that uses four pins. If you are Forward model owner, you can use different possibilies of adapters for your scope (similar to Core models, but for Forward models): original Pulsar adapter, Rusan adapter or Smartclip adapter. Smartclip is a one-piece adapter of elegant design, Rusan adapters are mostly made from two-pieces (56mm and 62mm are the only dimensions for which Rusan adapters are made from single piece) and also looks elegant and original Pulsar adapter that looks quite robust. For the original option you also need more space between the barrel and the objective bell (approximately 8 mm), while using aftermarket adapters need only 3-4 milimeters. Similar to Core adapters, dimensions are limited with original Pulsar adapter to 42, 50 and 56 mm, with Rusan adapters from 30 mm all the way up to 80 mm and with Smartclips in similar dimension span.

Original Pulsar adapters for Core and Forward models are quite affordable, although it is advised to leave them on the scope when you install them if you do not want to lose plastic inserts (which is quite a downside).

Above all, it is also important to know that all of these adapters can withstand recoils of more powerful calibers without problems.

CZ 600 Ergo (Long)

Sub Categories

About the CZ

CZ 600 Ergo (Long) Rifle Review