Now Shopping by

Scope - Sight type
Weaver Rail

Clear All

Remington 600 Mohawk

Sub Categories

Bases and Rails

About the Remington

The company was founded in 1816 when Eliphalet Remington II handcrafted his first rifle in his father’s forge and with the help of a local gunsmith managed to turn it into a simple flintlock rifle for his personal use. Taking second place in a shooting contest, Remington's rifle attracted a great amount of attention and shortly after, first orders started to come in.

The production line was moved to the Erie Canal which is nowadays known as the present location of the Remington factory in Ilion, New York. Early on, the company manufactured around 5000 pieces of M1841 Mississippi rifles to be used in the U.S. army additionally receiving a large government order of 1000 Jenks loading carbines. A few years after establishing its first armoury in 1848, three of the founder's sons joined the company and renamed it, E. Remington & Sons. The following years brought the outbreak of the Civil War in 1861 and at that point the company was supplying the Federal Army and Navy with arms such as pistols, carbines, rifles, and muskets, increasing their production rate significantly. Eliphalet Remington passed away in the same year, leaving the business up to his three sons. The army-oriented production shifted in direction again at the end of the War in 1865 when the company started to fabricate different firearms for civilian hunting and shooting sports. In 1871, the company established its ammunition production under the name Remington Ammunition Works. They were producing centrefire ammunition for pistols, shotguns, and rifles. Two years later, after gaining the trust of inventors Christopher Sholes and Carlos Glidden, the company even managed to produce its first fully functional typewriter in Ilion, New York.

In the following years, the company presented some of its early weapon models such as the first American autoloader (later known as M11), Model 8, and Model 10. At the beginning of World War I, Remington enlarged their facilities, expanding out to four locations, increasing arms and ammunition production rate once again. Signal guns, autoloading pistols such as Model 51, rifles and machine guns were swiftly being produced in great numbers. In addition, they entered a cutlery business during the war period, producing roughly 2.500.000 knives annually by the year 1926. Remington was revolutionizing its products every step of the way. Being the first to introduce the concept of game load ammunition, they took over the shotshell industry by storm. Ammunition production increased again in World War II when the company expanded its production to 7 more locations. Some of the most recognizable weapon models were presented during this period such as Model 03A4 or M1903A3 Springfield which was a renewed and simplified version of 1903 Springfield.

In the years after the war, they released the Model 870 'Wingmaster’ shotgun which became the world’s bestseller at that point, Nylon 66 autoloading .22 rifle, Model 700 bolt-action rifle, Model 1100 and an M24 sniper rifle that was regularly used as a standardized US army sniper rifle until 2010. Meanwhile, they also managed to stay operative in the knife making business. Ten years after building a new ammunition plant in Lonoke, Ark., DuPont purchased the remaining Remington shares and became the majority owner of the company, however, they later sold the assets to RACI Acquisitions in New York. In 2011 they re-focused on the production of handguns, launching the R1 1911 semi-automatic pistol. Another renowned weapon, namely the Model 783 bolt-action rifle was released two years later, in 2013.

Today, Remington is known as the oldest gun manufacturer in America, celebrating a more than 200-year-old history of diligence and quality.

Remington Mohawk 600 Rifle Review

Remington Mohawk 600 is a push feed bolt-action rifle that was manufactured from 1972 until 1979 and is a successor of the Remington Model 600. Both rifles share most of the features, with some minor differences in design. One such feature that stands out and separates the two is the ventilated rib free-floating barrel that only comes with the Model 600.

The steel receiver houses a bolt with two locking lugs that lock up safely into the action’s housing. The bolt face completely encloses the cartridge head for maximum protection against case rupture. Additionally, it comes equipped with a safety catch which is located at the rear of the receiver. When put in a safe position, the bolt handle cannot be raised to unlock and open the action. Remington Mohawk 600 also features a fixed box magazine that can hold up to four cartridges and a factory pre-set trigger that operates smoothly.

Contrary to most rifles, the trigger and trigger guard on both models are made of durable plastic, however, they can be replaced with the steel assembly. The stock of the rifle has somewhat square edges instead of a more traditional round shape that can be found on 600 models.

*Possible barrel length for Remington Mohawk 600 is 470mm (18.5-inch).

Figure 1: Remington Mohawk 600, chambered for .243 Win. (Source: https://images.gunsinternational.com/listings_sub/acc_330/gi_101003622/Remington-Model-600-Mohawk-in-243-Win_101003622_330_8ACEEDC9189EEE74.jpg)

Remington Mohawk 600 can be chambered for the following calibres*:

.222 Rem.
.223 Rem.
.243 Win.
6mm Rem.
6.5mm Rem. Mag.
.308 Win.
.35 Rem.
.350 Rem. Mag.

All Remington Mohawk 600 receivers come with three holes for mounting purposes, two on the front and one on the rear mounting surface.

The receiver of Remington Mohawk 600, chambered for 6mm Rem.

Figure 2: The receiver of Remington Mohawk 600, chambered for 6mm Rem. (Source: https://www.gunsinternational.com/guns-for-sale-online/rifles/remington-rifles/remington-mohawk-600-6mm-rem-.cfm?gun_id=101625125)

A: 21.9 mm

B: 92.1 mm

C: /

BHU: 2.9 mm

Ø: 6-48

R1: R51

R2: R17

Which Rifles Have Interchangeable Mounts

Two-piece mounts

All the rifles listed in the category below have two-piece mounts interchangeable with Remington Mohawk 600. To meet interchangeability conditions, two-piece mounts must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. Rifles that meet such criteria are:

Remington Seven
Remington 600
Remington 660
Remington 673
Remington XP-100

Although there are numerous two-piece mounting solutions available for Remington Mohawk 600, we do not recommend choosing one as the rear side of the receiver on this rifle only features one mounting hole. For optimal performance and safety, we suggest using one-piece mounts.

One-piece mounts

All the rifles listed in the category below have one-piece mounts interchangeable with Remington Mohawk 600. For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. Rifles that share the same dimensions and mounting surface with Remington Mohawk 600 are:

Remington Seven
Remington 600
Remington 660
Remington 673
Remington XP-100

*Should you have any additional information regarding possible mount matches, please contact us. We would gladly accept your help and expand our database accordingly.

Our Recommendations for Mounts

Picatinny Rails

This Picatinny rail made by the American company EGW is a suitable choice for your Remington Mohawk 600 as it will provide you with a secure and reliable mounting surface to mount your preferred optics on. It is made of high-quality aluminium and comes with a two-year warranty.

Note that this Picatinny has three holes for mounting purposes.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

Recknagel Two-Piece Weaver Base for Remington 7

$43.00

Add to compare

Filters

Sort

Remington 600 Mohawk

Sub Categories

About the Remington

Remington Mohawk 600 Rifle Review

Remington Mohawk 600 can be chambered for the following calibres*:

Which Rifles Have Interchangeable Mounts

Two-piece mounts

One-piece mounts

Our Recommendations for Mounts

Picatinny Rails

Help Us Build Our Riflescope Mounts Database

Recknagel Two-Piece Weaver Base for Remington 7

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Remington 600 Mohawk

Sub Categories

About the Remington

Remington Mohawk 600 Rifle Review

Remington Mohawk 600 can be chambered for the following calibres*:

Which Rifles Have Interchangeable Mounts

Two-piece mounts

One-piece mounts

Our Recommendations for Mounts

Picatinny Rails

Help Us Build Our Riflescope Mounts Database

Recknagel Two-Piece Weaver Base for Remington 7

Your wishlist