Kimber 8400 WSM

Sub Categories

Bases and Rails

The History of Kimber

Kimber Manufacturing was founded in 1979 by Jack Warne in Clackamas, Oregon. Previously, Warne had established Sporting Arms (Sportco) in Adelaide, Australia, after WWII, and later moved to Oregon in 1968 when Omar Industries acquired his company. Initially, Kimber of Oregon focused on producing dependable .22 LR rifles, later expanding to centerfire rifles, pistols, and eventually revolvers.

In the 1990s, several Kimber employees left the company to form Cooper Firearms of Montana, while Jack Warne founded Warne Manufacturing in 1991, specializing in scope mounting systems. Kimber of Oregon was eventually sold to Bruce Engel, and in the 1990s, Greg Warne and Les Edelman, owner of Nationwide Sports Distributors, partnered to revive the company under the name Kimber of America.

Despite rapid expansion, Greg Warne was ousted when Edelman gained majority ownership. Edelman then merged Jerico Precision's manufacturing capabilities with Kimber's dealer network, relocating production to New York and establishing the company's presence in New York and New Jersey. Over the years, Kimber has developed a variety of firearms, including pistols, rifles, and revolvers, as well as manufacturing accessories to complement their products.

Some popular pistol models include the R7 Mako, EVO SP, MICRO series, California Compliant, and Massachusetts Compliant, among others. Kimber's rifles are available in four action designs: Model 84M, Model 84L, Model 8400 WSM, and Model 8400 Magnum. The early Kimber Model 82 rifle was a predecessor to the Model 84 action series. Revolvers are offered in DASA, Stainless, DCR variants, and special editions. On October 21, 2020, Kimber announced the relocation of its corporate headquarters to Troy, Alabama.

Kimber 8400 WSM Rifle Review

Kimber 8400 WSM is a bolt-action centerfire rifle that was introduced by Kimber in 2003. It is essentially the ‘short action’ version of the 8400 series but is only chambered for Winchester Short Magnum (WSM) cartridges.

The rifle features a free-floated 24-inch match-grade barrel and an action that is bedded on twin aluminum pillars. The action is of a Mauser type with a three-position safety lever positioned on the rear end of the receiver. When the safety is in the full rearward position, the bolt is locked and a cartridge cannot be removed.

On the top of the receiver, there are drilled and tapped holes for scope mounts. The bolt has two opposing locking lugs and a Mauser-style claw extractor. The match-grade trigger of the Kimber 8400 WSM is fully adjustable and is factory preset at approximately 1587 g (3.5 lbs).

Since only WSM cartridges can be used, the magazine capacity of the rifle is 3 rounds. Positioned on the inside of the trigger guard is the magazine release button. Additionally, the stock comes with sling swivel studs and a rubber recoil pad.

Depending on the model, the 8400 WSM may have traditional walnut stocks with a hand-rubbed oil finish and hand-cut checkering, or Kevlar-carbon fiber stocks for rugged mountain hunting.

Kimber 8400 WSM, chambered for .325 WSM

Figure 1: Kimber 8400 WSM rifle, chambered for .325 WSM (Source: https://www.dominionoutdoors.ca/kimber-8400-classic-rifle-325-wsm-never-fired-pre.html)

Kimber 8400 WSM Calibers

The rifle can be chambered for the following calibers:

.270 WSM
7mm WSM
.300 WSM
.325 WSM

Kimber 8400 WSM Variants

The rifle is available in the following variants:

Kimber 8400 WSM MOUNTAIN ASCENT (SUBALPINE)
Kimber 8400 WSM MOUNTAIN ASCENT
Kimber 8400 WSM MONTANA
Kimber 8400 WSM CLASSIC SELECT GRADE

The caliber choice depends on the variant.

Kimber 8400 WSM comes with four holes on the top of the receiver which can be used for scope mounting purposes. There are two holes in the front and two on the back end of the receiver.

Kimber 8400 WSM receiver, chambered for 7mm WSM

Figure 2: The receiver of Kimber 8400 WSM, chambered for 7mm WSM (Source: https://www.gunsinternational.com/guns-for-sale-online/rifles/kimber-rifles/kimber-8400-classic-7mm-wsm.cfm?gun_id=101398156)

Kimber 8400 WSM

A: 21.9 mm

B: 93.6 mm

C: 12.7 mm

BHU: 3.3 mm

Ø: 8-40

R1: R23.6

R2: R17

Scope Mounts Interchangeable With Kimber 8400 WSM

Rifles That Have One-Piece Scope Mounts Interchangeable With Kimber 8400 WSM

All the rifles listed in the category below have one-piece mounts interchangeable with Kimber 8400 WSM. For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension.

Rifles That Have Two-Piece Scope Mounts Interchangeable With Kimber 8400 WSM

All the rifles listed in the category below have two-piece mounts interchangeable with Kimber 8400 WSM. To meet interchangeability conditions, two-piece mounts must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. Rifles that have two-piece scope mounts interchangeable with Kimber 8400 WSM are:

Kimber 8400 Magnum

Due to the specific receiver dimensions of Kimber 8400 WSM rifles, we currently cannot provide you with the full list of interchangeable scope mounts. Should you happen to own this rifle and would be willing to share more information regarding interchangeable scope mounts, please contact us at info@optics-trade.eu

Your help is greatly appreciated.

Best Scope Mounts for Kimber 8400 WSM

Fixed Scope Mounts for Kimber 8400 WSM

This DNZ one-piece mount manufactured in America is made from aluminium and fits perfectly on the mounting surface of Kimber 8400 WSM. In addition, it comes with a ten-year warranty.

Picatinny Rails for Kimber 8400 WSM

If you are looking for a multi-functional mounting surface for your rifle, we recommend this Picatinny rail manufactured by the American company EGW. It is made entirely of aluminium and comes with a two-year warranty.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Compatibility Above

Ask for price

View Product

Add to compare

Filters

Sort

Kimber 8400 WSM

Sub Categories

The History of Kimber

Kimber 8400 WSM Rifle Review

Kimber 8400 WSM Calibers

Kimber 8400 WSM Variants

Scope Mounts Interchangeable With Kimber 8400 WSM

Rifles That Have One-Piece Scope Mounts Interchangeable With Kimber 8400 WSM

Rifles That Have Two-Piece Scope Mounts Interchangeable With Kimber 8400 WSM

Best Scope Mounts for Kimber 8400 WSM

Fixed Scope Mounts for Kimber 8400 WSM

Picatinny Rails for Kimber 8400 WSM

Help Us Build Our Riflescope Mounts Database

Talley 25.4 mm Complete Mount for 8400

Talley 25.4 mm Complete Mount for Kimber 8400 (Extended)

Talley 30 mm Complete Mount for Kimber 8400

Talley 30 mm Complete Mount for Kimber 8400 (Extended)

DNZ 25.4 mm Complete Mount for Kimber 8400 WSM

DNZ Game Reaper 30mm Mount, Kimber 8400 WSM

Warne Mountain Tech Rail for Kimber 8400 WSM

Warne Mountain Tech Rail for Kimber 8400 Magnum

EGW HD Kimber 8400 (8400 WSM) Short Action Picatinny Rail

EGW HD Kimber 8400 (8400 WSM) Short Action Picatinny Rail, 20 MOA

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Kimber 8400 WSM

Sub Categories

The History of Kimber

Kimber 8400 WSM Rifle Review

Kimber 8400 WSM Calibers

Kimber 8400 WSM Variants

Scope Mounts Interchangeable With Kimber 8400 WSM

Rifles That Have One-Piece Scope Mounts Interchangeable With Kimber 8400 WSM

Rifles That Have Two-Piece Scope Mounts Interchangeable With Kimber 8400 WSM

Best Scope Mounts for Kimber 8400 WSM

Fixed Scope Mounts for Kimber 8400 WSM

Picatinny Rails for Kimber 8400 WSM

Help Us Build Our Riflescope Mounts Database

Your wishlist