Close

Tikka T1x

About the Tikka

Tikkakoski was at first a metal workshop established in 1893 in Jyväskylä, Finland, which later, at the end of World War I in 1918 evolved into a factory that produced gun components. One of the most important guns of Tikka in the 20th century is most definitely Suomi KP/-31, which is regarded as one of the most successful submachine guns of World War II.

Tikkakoski and Sako cooperated on a prototype rifle series in 1981 and soon after that, Tikkakoski was acquired by Sako. By the end of the decade, the production of Tikka rifles has already shifted from Jyväskylä to Sako headquarters in Riihimäki. Tikka still holds on to their traditional gunsmith craftsmanship, visually inspecting every rifle barrel and then manually testing the rifle with test shots. In 2009 Beretta group took over Sako, which got Sako and Tikka access to the most advanced production methods.

Tikka T1x

Source:https://www.tikka.fi/en-us/rifles/tikka-t1x/t1x-mtr

Tikka T1x

Source:https://www.tikka.fi/rifles/tikka-t1x/t1x-upr

Tikka T1x Rifle Review

Until 2021 the only version of Tikka T1x rimfire rifle that existed was MTR, but in 2021 another version got released: Tikka T1x UPR. The stock of the older MTR is shaped more like a classic hunter rifle stock, while the UPR stock is shaped more like classic tactical rifles stock. T1x has a modular synthetic stock, that has interchangeable pistol grips and also allows these grip angles to be modified.

Unfortunately, additional grips are sold separately and are not included in the original price. T1x is available in 22LR & 17HMR calibres and has a detachable 10 round magazine for both calibres. It has a 11 mm dovetail with 4 holes for mounting purpose.

Tikka T1x

Source:https://www.rimfirecentral.com/forums/showthread.php?t=1108361

ABC dimensions

A: 22 mm
B: 63,8 mm
C: 22 mm

Our recommendation for mounts

Fixed mounts:

For mounts made of aluminium we recommend BKL rings.

For mounts made of steel we recommend Warne rings.

Detachable repeatable mounts:

Non-repeatable detachable mounts, like Rusan mounts should be sufficient for Tikka T1x rifle.

If you need mounts for rails instead of rings, we would recommend EAW.

Picatinny rails:

The only Picatinny rail appropriate for Tikka T1x is Contessa Picatinny Rail.

Help us build our riflescope mounts database

If you have this rifle or any other rifle at home, we would really appreciate it if you could send us some photos of the rifle receiver (mounting surface of the rifle when there are no mounts installed), because it would help us expand our rifle mounts database. If you send us a photo of rifle receiver which we don’t already have, that would be of great value to us and we will definitely reward you for your help.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters
Sort
4 Items
Show
per page
Close
Sort By
Filters
Sort
4 Items
Show
per page
Close
Sort By

Airguns or pellet guns (the name comes from projectiles they shoot – pellets) are popular among all generations of people with a variety of different interests.

They are used for

  • plinking,

  • hunting,

  • sport competitions etc.

All these activities demand variety of different airguns. A lot of these applications do not require a rifle scope for using an air gun, but some of them do – especially hunting or long range shooting.

Hawke 9-11mm Match Mounts, 30mm, high

Hawke 9-11mm Match Mounts, 30mm, high

 

General Features of Airgun Scope Mounts

It is common to almost all airguns that they have 11 mm dovetail on the receiver. This dovetail is full length and it is used for mounting a rifle scope or diopter. Such dovetails are basically the same as on the rimfire rifles (.22 calibre). It is important to know that they share the same mounting platform and this is why we can found airgun scope mounts also on rimfire rifles and normally, similar scopes are used on both types of rifles.

When thinking of mounting a rifle scope on the airgun, we have to consider that spring powered airguns have strong recoil in both directions. This is why the robustness and rigidness of the mounts is extremely important (especially with spring powered airguns). This problem is not the case with rimfire rifles, where recoil is very mild.

Mostly, these mounts are made from aluminium and can also have a screw that serves as recoil stopper. The screw can be placed vertically, but with the two part design scope mounts, screw can be placed horizontally. Although, majority of airgun scope mounts comes without recoil notches. There are two options available for mounting the scope on the airgun monoblock scope mount: 25.4 mm (1’’) or 30 mm rings. Other dimensions can also be found, however - they are extremely rare.

Normally, airgun mounts are affordable and in most cases fixed. Detachable airgun scope mounts are usually very rare. However, the most affordable airgun mounts are also the ones from the lowest quality (although, sufficient) and high quality mounts can be expensive, too.

Adjustable inclination on the rifle scope mounts is advisable, usable and a lot of times needed (because of the imperfections of different parts – rifle, mount, rings and dovetail). Some of the mounts also have recoil buffer available. There are also available shock absorbing recoil buffers that can be bought separately and installed behind the scope mount and help to absorb recoil.

BKL 0.6" Long Dovetail Rings, 30 mm

BKL 0.6" Long Dovetail Rings, 30 mm


Monoblock Scope Mounts for Airguns

Monoblock scope mounts for airguns are definitely more reliable than two piece scope mounts. This is normally because they can handle recoil much better. They are robust, rigid, hard and they offer great clamping surface for the dovetail. However, with monoblock scope mounts, setting the proper eye relief might be an issue in some cases. Also, monoblock mounts are almost always more expensive than similar two piece mounts. Clamping surface on the rail which is connected to the rings in one piece is usually higher than it can be with comparable two piece mounts. This might also be an disadvantage, worth mentioning.


One Part and Two Part Design of Airgun Scope Mounts

When we are talking about two piece solutions of airgun mounts, we should not forget to mention some of the differences between one part and two part design of these mounts. One part design is easier to produce, therefore these mounts are cheaper as a rule. Versatility with one part design of scope mounts is normally poor. More options of mounting a scope are normally available with two part design scope mounts. It is good to know that airgun scope mounts for rifle scopes with rail systems are not usual (actually, they are rare). If they are available, they are normally available with two part design of scope mounts. Example for such mount could be Recknagel’s tip off mount for 11 mm dovetail on the bottom and with Zeiss rail option (ZM/VM) on the top. They also offer a LM rail version of these mounts.