Anschutz 1761

The History of Anschutz

On the first of July in 1856, the son of the master gunsmith Johann Heinrich Gottlieb Anschütz, Julius Gottfried Anschütz founded the company J.G. ANSCHÜTZ in Zella-Mehlis, Thuringia. Forty years later, they relocated from the small workshop to their first factory with 76 employees. The founder of the J.G. ANSCHÜTZ company passed away in 1901. His sons Fritz and Otto took over their father's work. The latter died in 1923. The company was continued by Fritz August Anschütz supported by his two sons Max Fritz and Rudolf Charles Anschütz, the third ANSCHÜTZ generation. The factory was closed down and then destroyed and seized after the war.

1950 was the year of a fresh start in the Danube Bastion in Ulm where the company J.G. ANSCHÜTZ GmbH was founded. 7 people and 20 machines initially handled air pistols and gun repairs; afterward, Flobert rifles (rimfire rifles) and Match rifles were added. After the first sport shooting success, further successes came one after the other. Max Schmeling, a former boxing champion, also competed for Germany on the clay pigeon shooting national team. He was familiar with ANSCHÜTZ rifles because he was a target shooter and a hunter. He purchased some of them in Ulm and even suggested a change in the company's logo.

Dieter Anschütz, a member of the fourth generation, took over management in 1968 and proved himself as a good leader. The catchphrase "DIE MEISTER MACHER" was born out of the achievements of the ANSCHÜTZ target actions across the globe. It still holds true today. As managing director since 1992, Jochen Anschütz continues to administer the company with the aid of his son.

Anschutz 1761 Rifle Review

Anschutz 1761 is a small-bore bolt-action rifle designed for sporting shooters and hunters. It is, however, not very similar to Anschutz's traditional Match 54/64 actions.

As opposed to two rows of three-locking-lugs robust bolts like in the mentioned actions, this one consists of a bolt featuring a single row of three locking lugs with an opening angle of sixty degrees. The trigger is single-stage and has an adjustable pull weight and travel, while a two-stage trigger is also being developed. The safety is an improved version of the old Anschutz's mechanism, which blocks the trigger, but it is much more silent due to the reduced pressure required to operate it.

Anschutz 1761's barrel is 457 mm (18 inches) long, while it measures 902 mm (35.5 inches) overall. The steel detachable magazine has a capacity of 5+1 rounds and a simple latch in front of the trigger to release it.

Anschutz 1761, chambered for .22 LR

Figure 1: Anschutz 1761, chambered for .22 LR (Source: https://www.anschuetz-sport.com/en/jagd/)

Anschutz 1761 Calibers

Anschutz 1761 is chambered for the following calibers:

.17 HMR
.22 LR
.22 WMR

Anschutz 1761 Variants

Anschutz 1761 is available in the following variants:

Classic
Thumbhole stock
Monte Carlo
Classic whisper - silenced
MP R Multi Purpose Beavertail
MS R Silhouette

Anschutz 1761 receiver, chambered for .22 LR

Figure 2: Anschutz 1761 receiver, chambered for .22 LR (Source: https://www.anschuetz-sport.com/en/jagd/kleinkaliber/)

Anschutz 1761 receiver

Scope Mounts Interchangeable with Anschutz 1761

Rifles that have one-piece mounts interchangeable with Anschutz 1761

For one-piece mounts to fit on a rifle, the mounting surfaces of these rifles must match in all dimensions. The following rifles are interchangeable:

All rifles with a rounded 11 mm dovetail rail

Rifles that have two-piece mounts interchangeable with Anschutz 1761

For two-piece mounts to fit on a rifle, mounting surfaces must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. The following rifles are interchangeable:

All rifles with a rounded 11 mm dovetail rail

Best Scope Mounts for Anschutz 1761

Fixed Scope Mounts for Anschutz 1761

We recommend BKL Dovetail Rings due to their balance of affordability and quality. They are made of aluminum and come with a two-year warranty.

Detachable Repeatable Scope Mounts for Anschutz 1761

If you plan on using different scopes on your rifle, this Rusan pivot mount is easy to detach and stays on point when reattached without the need for zeroing. It comes with a ten-year warranty.

Picatinny Rails for Anschutz 1761

If you wish to install a Picatinny rail on top of the dovetail rail, this is the best affordable choice by the Italian manufacturer. It is made of steel and comes with a thirty-year warranty.

Help us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

In stock

BKL 0.6" Long Dovetail Rings, 30 mm

As low as $29.99

View Product

Add to compare

In stock

BKL 0.6" Long Dovetail Ring, 25.4 mm

As low as $19.99

View Product

Add to compare

In stock

BKL 1" Long Double Strap Dovetail Rings, 30 mm

As low as $59.99

View Product

Add to compare

In stock

BKL 1" Long Double Strap Dovetail Rings, 25.4 mm

As low as $37.99

View Product

Add to compare

In stock

BKL 1" Long Double Strap Offset Dovetail Rings, 30 mm

As low as $69.99

View Product

Add to compare

In stock

BKL 1" Long Double Strap 14 mm Dovetail Rings, 25.4 mm

As low as $37.99

View Product

Add to compare

Burris 25.4 mm Rimfire/Airgun Rings, 11 mm Dovetail

Ask for price

View Product

Add to compare

BKL 0.6" Long Offset Dovetail Rings, 30 mm

As low as $47.95

View Product

Add to compare

BKL 1" Long Double Strap Off-Set Dovetail Ring - Single, 30 mm

As low as $37.99

View Product

Add to compare

BKL 0.6" Offset Dovetail Ring - Single, 25.4 mm

As low as $25.99

View Product

Add to compare

BKL 1" Long Double Strap Offset Dovetail Ring - Single, 25.4 mm

As low as $29.99

View Product

Add to compare

Gamo Medium Scope Mount TS-250 1"

$17.00

View Product

Add to compare

Burris Signature Rings, 25.4 mm, 11 mm Dovetail

Ask for price

View Product

Add to compare

Filters

Sort

Airguns or pellet guns (the name comes from projectiles they shoot – pellets) are popular among all generations of people with a variety of different interests.

They are used for

plinking,
hunting,
sport competitions etc.

All these activities demand variety of different airguns. A lot of these applications do not require a rifle scope for using an air gun, but some of them do – especially hunting or long range shooting.

Hawke 9-11mm Match Mounts, 30mm, high

General Features of Airgun Scope Mounts

It is common to almost all airguns that they have 11 mm dovetail on the receiver. This dovetail is full length and it is used for mounting a rifle scope or diopter. Such dovetails are basically the same as on the rimfire rifles (.22 calibre). It is important to know that they share the same mounting platform and this is why we can found airgun scope mounts also on rimfire rifles and normally, similar scopes are used on both types of rifles.

When thinking of mounting a rifle scope on the airgun, we have to consider that spring powered airguns have strong recoil in both directions. This is why the robustness and rigidness of the mounts is extremely important (especially with spring powered airguns). This problem is not the case with rimfire rifles, where recoil is very mild.

Mostly, these mounts are made from aluminium and can also have a screw that serves as recoil stopper. The screw can be placed vertically, but with the two part design scope mounts, screw can be placed horizontally. Although, majority of airgun scope mounts comes without recoil notches. There are two options available for mounting the scope on the airgun monoblock scope mount: 25.4 mm (1’’) or 30 mm rings. Other dimensions can also be found, however - they are extremely rare.

Normally, airgun mounts are affordable and in most cases fixed. Detachable airgun scope mounts are usually very rare. However, the most affordable airgun mounts are also the ones from the lowest quality (although, sufficient) and high quality mounts can be expensive, too.

Adjustable inclination on the rifle scope mounts is advisable, usable and a lot of times needed (because of the imperfections of different parts – rifle, mount, rings and dovetail). Some of the mounts also have recoil buffer available. There are also available shock absorbing recoil buffers that can be bought separately and installed behind the scope mount and help to absorb recoil.

BKL 0.6" Long Dovetail Rings, 30 mm

BKL 0.6" Long Dovetail Rings, 30 mm

Monoblock Scope Mounts for Airguns

Monoblock scope mounts for airguns are definitely more reliable than two piece scope mounts. This is normally because they can handle recoil much better. They are robust, rigid, hard and they offer great clamping surface for the dovetail. However, with monoblock scope mounts, setting the proper eye relief might be an issue in some cases. Also, monoblock mounts are almost always more expensive than similar two piece mounts. Clamping surface on the rail which is connected to the rings in one piece is usually higher than it can be with comparable two piece mounts. This might also be an disadvantage, worth mentioning.

One Part and Two Part Design of Airgun Scope Mounts

When we are talking about two piece solutions of airgun mounts, we should not forget to mention some of the differences between one part and two part design of these mounts. One part design is easier to produce, therefore these mounts are cheaper as a rule. Versatility with one part design of scope mounts is normally poor. More options of mounting a scope are normally available with two part design scope mounts. It is good to know that airgun scope mounts for rifle scopes with rail systems are not usual (actually, they are rare). If they are available, they are normally available with two part design of scope mounts. Example for such mount could be Recknagel’s tip off mount for 11 mm dovetail on the bottom and with Zeiss rail option (ZM/VM) on the top. They also offer a LM rail version of these mounts.

Anschutz 1761

The History of Anschutz