Close

Steyr Mannlicher Luxus Magnum (Picatinny)

Sub Categories

Mounts

The History of Steyr

The story of Steyr Mannlicher began in 1821 when Leopold Werndl, a blacksmith, started manufacturing iron parts for firearms in the city of Steyr. His son Josef Werndl took over his business and founded the 'Josef und Franz Werndl & Comp. Waffenfabrik und Sägemühle in Oberletten ' in 1864. In the following years, he played a crucial role in the development of several rifles, including the straight pull-rifles M. 85 and M. 86. At the beginning of the 20th century, the engineers Ferdinand Mannlicher and Otto Schönauer developed the Original Mannlicher Schönauer, a legendary hunting rifle, the production of which took place until 1973. The company grew over the years and reached a production capability of 4.000 firearms per day before World War I. After the War, Steyr was prohibited from firearm manufacturing after the Treaty of Saint-Germain-en-Laye was signed. To avoid going bankrupt, they used their knowledge and machinery to manufacture cars, bicycles, motorcycles, tractors, trucks, dynamos, electric motors, and other things (they were not allowed to resume firearm production until 1930). In 1926, the company’s name was changed to Steyr-Werke AG. It merged with Austro-Daimler-Puchwerke AG in 1934 to form Steyr-Daimler-Puch AG. Both Austro-Daimler (previously a subsidiary of Daimler-Motoren-Gesellschaft) and Puch (founded by the Slovenian inventor and mechanic Janez Puh) were active in the automobile industry, with Puch also manufacturing bicycles, motorcycles, and mopeds.

They even employed Ferdinand Porsche for a time – he made several contributions to the company – one of them was designing an air-cooled 3.5 L V8 engine for the Steyr RSO Raupenschlepper Ost tracked vehicle. Steyr is known for modifying Fiat cars and adding their engines to some of the models (Steyr-Fiat 1100 Mod E and Fiat 1400, for example). In 1972, they cooperated with Mercedes in the design of Puch G, also known as Mercedes Benz G-class.

During World War II, the company focused on firearm, vehicle, aviation engine, and ball-bearing production for the German military. After a short firearm manufacturing ban after the end of the War, Steyr resumed the production of arms in 1950. In the years that followed, they presented many innovative firearms such as StG 77 (also known as Steyr AUG), an assault rifle with a bullpup design; SSG 69, which was ahead of its time after its release in 1969, and many others. In 1989, Steyr-Daimler-Puch AG broke up into different sectors; Steyr Mannlicher AG became independent. The company has strived to be internationally oriented, so it changed its name to Steyr Arms in 2019.

Steyr Mannlicher Luxus Magnum (Picatinny) Rifle Review

Shortly after Steyr ended the production of their Luxus L/M/S models in 1996, they presented the new series Luxus which remained in production until around 2020. The rifle was completely refurbished and designed to be as user-friendly as possible. It is available in the Standard and Magnum version, each chambered for its caliber group. The user can choose between two different kinds of mounting surfacesa Picatinny rail or a swing mount rail. If you happen to own Steyr Mannlicher Luxus Magnum with swing mount rail, you can see our landing page on this rifle here.

Steyr Mannlicher Luxus Magnum is a modular bolt action rifle allowing the user to change the components and re-chamber the rifle at home quickly using some basic tools. There is a single screw at the lower end of the forearm that holds the receiver to the chamber and barrel. Once unscrewed, the barrel and forearm can be removed with ease. One feature which adds to the practicality of the modular design is that either of the scope-mounting surfaces stays permanently mounted on the barrel, which allows for retaining zero of the scope.

The aluminum alloy receiver is anodized, and the rifle comes with a twisted barrel profile. Contrary to the older Luxus models which featured a rear locking mechanism, the Luxus Magnum uses six front locking lugs that lock up directly into the barrel. The bolt comes at a lift angle of 70°, has a cocking indicator placed on the rear side, and gas ports along its length. The single-set trigger is adjustable for trigger pressure by turning a small screw positioned on the lower side of the trigger. However, like most other components on Luxus Magnum, the trigger assembly can also be swapped for another one.

There is a three-position rotary safety at the back of the receiver with a white dot indicator blocking the trigger but allowing the bolt to be removed, and the grey tab indicator that locks both – the bolt and the trigger. The detachable single-column magazine holds three or four rounds and can be removed by pressing two buttons on each side simultaneously. Additionally, the rifle is equipped with screw adjustable front and rear sights

Steyr Mannlicher Luxus Magnum, chambered for .300 Win. Mag.

Figure 1: Steyr Mannlicher Luxus Magnum with Picatinny (Source: https://www.steyr-arms.com/en/hunting-rifles/luxus/)

Steyr Mannlicher Luxus Magnum Calibers

Steyr Mannlicher Luxus Magnum is chambered for the following calibers:

  • .270 WSM            

  • 7mm Rem. Mag.   

  • .300 WSM  

  • .300 Win. Mag.    

  • 8x68 S       

  • .375 H&H Mag.  

One of the possible scope mounting surfaces for Steyr Mannlicher Luxus Magnum is the Picatinny rail which is mounted on the barrel with two screws. When the rifle is taken apart, the scope mount stays permanently attached to the barrel which allows for the scope to retain its zero.

Steyr Mannlicher Luxus Magnum with Picatinny installed:

The receiver of Steyr Mannlicher Luxus Magnum, chambered for .300 Win. Mag.

Figure 2: The receiver of Steyr Mannlicher Luxus Magnum, chambered for .300 Win. Mag. (Source: https://www.lovuzdar.sk/foto-350373/steyr-mannlicher-luxus-300-win-magnum?foto_typ=6)

Scope Mounts Interchangeable With Steyr Mannlicher Luxus Magnum

Rifles That Have One-Piece Scope Mounts Interchangeable With Steyr Mannlicher Luxus Magnum

All the rifles listed in the category below have one-piece scope mounts interchangeable with Steyr Mannlicher Luxus Magnum. For one-piece scope mounts to be interchangeable with Steyr Mannlicher Luxus Magnum, the mount should not be shorter than 60 mm. Rifles that share the same dimensions and mounting surface with Steyr Mannlicher Luxus Magnum are:

  • All rifles with Picatinny rail mounting surface (middle distance = 60mm) 

Rifles That Have Two-Piece Scope Mounts Interchangeable With Steyr Mannlicher Luxus Magnum 

All the rifles listed in the category below have two-piece scope mounts interchangeable with Steyr Mannlicher Luxus Magnum. To meet interchangeability conditions, two-piece scope mounts must match in all dimensions except the B distance. B distance can vary because two-piece scope mounts can be installed and adjusted closer or further apart. Rifles that meet such criteria are:

  • All rifles with Picatinny rail mounting surface

Best Scope Mounts for Steyr Mannlicher Luxus Magnum

Fixed Scope Mounts for Steyr Mannlicher Luxus Magnum

We recommend this fixed INNOMOUNT one-piece mounting solution manufactured in Germany. It is made of high-quality aluminum and comes with a ten-year warranty.

Detachable Repeatable Scope Mounts for Steyr Mannlicher Luxus Magnum

This one-piece INNOMOUNT mounting solution provides the user with the flexibility of easily attaching and detaching an optic without any tools and retaining zero on the scope at the same time. It is produced in Germany, made of high-quality aluminum, and comes with a ten-year warranty.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu   

Filters
Sort
Items 1-100 of 211
Show
per page
Close
Sort By
Mount series
  1. -
  2. INNOmount One-Piece Fixed Mounts
  3. INNOmount One-Piece Mounts
  4. INNOmount Slight Mounts
  5. INNOmount Spare Parts
  6. INNOmount Two-Piece Mounts
Filters
Sort
Items 1-100 of 211
Show
per page
Close
Sort By