Marlin XT-17

Sub Categories

C-more Sights Mounts

About the Marlin

The story of the Marlin company started in 1836 in Connecticut, the birthplace of John Mahlon Marlin. As the civil war commenced, he began his working carrier at the Colt plant in Hartford. Five years after the war, he started his own company in New Haven, Connecticut, and named it Marlin Firearms. Between 1870 and 1899 the company produced a manifold of pistols, revolvers, and derringers with one of the biggest strategic moves being made in 1881 when it introduced its first lever-action repeating rifle – Model 1881. Another breakthrough was made by the company with the introduction of the 1889 Model - a lever rifle with a solid top that ejected the empty cartridges out of the side of the receiver. This was the feature that in later years became equated with the term "Marlin Safety". The concept was further utilised in the following years on a .22 rimfire lever-action - Model 1891. That led to the development of Model 39, introduced in 1922, with almost 3 million rifles produced to date. Two years later, a new model was released under the name Model 1893 which was later renamed the Model 1936/Model 36, manufactured up until 1948. It was improved and renamed Model 336 in the same year. For some time, Marlin also produced rifles for Savage as they lacked manufacturing capabilities.

After the death of John Marlin, his two sons inherited the business, and the company went through several ownership changes. It was sold around 1915 to William Bonbright & Co. and Kissell-Kinnicut & Co. - a group of investors associated with J.P. Morgan. Shortly after, A.F. Rockwell became the president of the company and renamed it Marlin Rockwell Corporation in 1916; however, in 1919, John. F. Moran took over. After World War I, the economic decline became apparent, and the company shifted its focus to various other businesses. They manufactured ball bearings, roller bearings, radiators, wires, bombs, and even automobiles. In 1921, a simplified manufacturing line was formed that specialized in the production of sporting firearms and was named Marlin Firearms Corporation. Due to a decrease in sales, the company was put on the auction block in 1924 when it was bought for a small price of $100 by lawyer Frank Kenna.

The after-war years offered new opportunities and the sales gradually improved. In 1949, Model 36 was redesigned and renamed Model 336. It is still manufactured today as one of the most popular lever-action rifles in the world. Additionally, the company pioneered the Micro-Groove rifling which was supposed to allow for better shooting accuracy and was the standard on Marlin rifles up until the 1990s.

In 1956, the company introduced Model 56 which featured a modernised lever design with a short lever throw allowing for fast reloading. The series was later named Marlin 'Levermatic'. Shortly after, Model 57 and a centrefire Model 62 were presented. However, the Levermatic series did not sell too well and was discontinued in 1973. Some of the most recognizable models from that time were Glenfield Model 30, Model 444, and reintroduced Models 1894 and 1895 which are still manufactured today. With new regulations taking place, Marlin added a cross-bolt safety to their rifles around 1983. Numerous models were presented in later years such as Model 700, Model 780, Model 80, Model 7000, Model 2000, Model XL7, and XS7 along with some pump-action shotguns like Models 16, 17, 19 etc.

In 2007 Marlin was bought by Remington Arms, however, the ownership changed again in the following decade. Since 2020, the Marlin is owned by Sturm, Ruger & Co. Over 6 million guns and 150 years later, they carry on Marlin’s legacy of innovativeness and quality.

Marlin XT-17 Rifle Review

Marlin XT-17 is structurally and mechanically the same as XT-22; however, it is chambered for a smaller .17 HMR calibre. It is available in both – synthetic and wooden stock – depending on the variant.

Instead of a multi-lug system, there is a square block on the bolt's body that locks the bolt assembly in place and functions as a single locking lug. It comes with either a seven-round or a four-round clip magazine that sits flush with the forearm and can be released by pressing the spring steel button. The updated Pro-Fire trigger that replaced the older version featured on the 900-series is adjustable from 1360 g (3lbs) to 2721 g (6-lbs). It can be easily fine-tuned by the user using a hex key. The two-position safety lever is positioned on the right upper side of the receiver. It blocks the trigger and is marked with the ‘F and S’ indications which are stamped on the side of the receiver.

The action is made of steel and so is the 559 mm (22-inch) barrel that is Micro-Grooved. The receiver comes with 3/8 dovetail grooves and is additionally drilled and tapped for optic mounts, expanding the list of mounting options. Some variants come with a pre-installed ramp front sight, an adjustable semi-Buckhorn folding rear sight and a rubber recoil pad.

The possible barrel length for Marlin XT-17 is 559 mm (22-inch).

Figure 1: Marlin XT-17, chambered for .17 HMR (Source: https://www.liveauctioneers.com/en-gb/item/119546947_marlin-model-xt-17-17hmr-caliber-bolt-action-rifle)

Marlin XT-17 can be chambered for the following calibres:

.17 HMR

The rifle is available in the following variants:

Marlin XT-17R
Marlin XT-17V
Marlin XT-17VR
Marlin XT-17VSL
Marlin XT-17SLB

Marlin XT-17 receivers come with a 3/8 dovetail and four holes for mounting purposes, two on the front and two on the rear mounting surface.

Marlin XT-17, chambered for .17 HMR

Figure 2: The receiver of Marlin XT-17, chambered for .17 HMR (Source: https://www.sportingtargets.co.uk/170601006-marlin-xt-17r-11695718.aspx)

Skica dimenzij

Which Rifles Have Interchangeable Mounts

Two-piece mounts

For two-piece mounts to fit on a rifle, mounting surfaces must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. Rifles that meet such criteria are:

All rifles featuring a 3/8 dovetail

One-piece mounts

For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. Rifles that meet such criteria are:

All rifles featuring a 3/8 dovetail

Unfortunately, we currently lack more information regarding interchangeable mounts for the Marlin XT-17 rifle. Should you have any additional information regarding possible mount matches, please contact us. We would gladly accept your help and expand our database accordingly.

Our Recommendations for Mounts

Fixed Mounts

This one-piece mounting solution manufactured by the American company DNZ is made of aluminium and matches the mounting surface of Marlin XT-17 perfectly. Additionally, it comes with a ten-year warranty.

Picatinny Rails

If you are looking for one of the most popular mounting solutions on the market that provides the user with a variety of mounting options, this Picatinny rail made by the American company EGW is a great choice. Made of high-quality aluminium, it is durable and will match the dimensions of the receiver perfectly.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

In stock

C-More STS Rail Mount - 3/8'' Rail

$49.00

Add to compare

Filters

Sort

Marlin XT-17

Sub Categories

About the Marlin

Marlin XT-17 Rifle Review

Marlin XT-17 can be chambered for the following calibres:

The rifle is available in the following variants:

Which Rifles Have Interchangeable Mounts

Two-piece mounts

One-piece mounts

Our Recommendations for Mounts

Fixed Mounts

Picatinny Rails

Help Us Build Our Riflescope Mounts Database

C-More STS Rail Mount - 3/8'' Rail

VIDEO

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Marlin XT-17

Sub Categories

About the Marlin

Marlin XT-17 Rifle Review

Marlin XT-17 can be chambered for the following calibres:

The rifle is available in the following variants:

Which Rifles Have Interchangeable Mounts

Two-piece mounts

One-piece mounts

Our Recommendations for Mounts

Fixed Mounts

Picatinny Rails

Help Us Build Our Riflescope Mounts Database

C-More STS Rail Mount - 3/8'' Rail

VIDEO

Your wishlist