Now Shopping by

Mounts Fashion
One-Piece Mount

Clear All

Single piece scope mounts

Introduction

The most important fact that is in common with all single piece scope mounts is that the both scope rings share one piece of material.

The whole mount is made of one piece of raw material and common process to make mount of it is milling.

Single piece scope mounts are usually made for tactical applications and are most suitable for use on Picatinny rails. Although, there are some manufacturers on the market which make elegant one piece mounts for hunting applications, such as:

Spuhr,
ERA-TAC Ultralight etc.

Besides Picatinny rails, there are other rail standards that are also common with this design of scope mounts, for example:

11 mm – Al
5 mm – Tikka, Sako TRG
19 mm – CZ 550

These type of mounts are usually made from high quality aluminium and can be either quick detachable or fixed.

Two groups of Single piece scope mounts for different purposes

FOR HUNTING RIFLES

These mounts can be found for more modern rifles, because decades ago they were not available yet. Even though we can find these mounts with great, elegant shapes (like Blaser, Sauer, Innomount and other mounts, for example), they are not that much popular with other, cheaper manufacturers.

These mounts are quite expensive and therefore they can be mostly found on modern rifles of higher price levels.

FOR TACTICAL RIFLES

Single piece scope mounts for tactical rifles are nearly perfect. It is probably the best way to mount a scope with enough rigidness, hardness, durability, reliability and precision. On the other hand, these scope mounts are normally expensive.

PROS

One of the most important advantages of single piece scope mounts is perfect ring alignment. Therefore, normally you will not flex or damage the scope with this kind of mount.

The user also gets a bigger contact surface between the scope and the mount, which is a favourable factor. One of great things with these scope mounts is that there is no lapping needed.

CONS

If you are an aesthetic freak, you might not be too happy with these mounts. They usually have the bulky appearance and bigger mass. If you can live with that, you will be just fine with the choice.

Although, you have to be prepared to pay somewhat bigger price because they are normally more expensive. Also, there is the less adjustable length for proper eye relief.

Is lapping still advisable with one piece scope mounts?

There is no need for lapping at all. You will not gain anything with it, because these scope mounts are made of one piece of material, which means perfect alignment. Of course, the mount has to be made as it should be – proper quality during manufacturing is needed.

If the quality of the production process and design is not good enough, there might be problems with such mounts. Not only that lapping is normally not needed, but there is also no need for bedding, which is also a great advantage.

Single piece mounts with an inclination

Single piece scope mounts are the most common mount form with inclination. The inclination is usually 20 MOA. Of course, matched rings are needed; they should not be mixed, otherwise, we lose this great option.

These type of mounts are great for long-range shooting because they offer whole new possibilities for long-range shooters.

Conclusion

Single piece scope mounts are great mounts because of the perfect ring alignment, rigidness and so on.

They are normally quite bulky, which might be the reason (in addition to expensive prices) that they are not so much popular on hunting rifles (except original mounts from hunting rifles manufacturers which can be very elegant and good looking – Blaser mount, Sauer mount, etc.) as they are on sport and tactical rifles. Lapping or bedding are normally not needed, which are just two more factors why they are great mounts.

Normally, if you like the appearance, you cannot go wrong with these type of mounts.

Filters

Sort

Noblex Sight Mount for GMF Ventilated Rails

As low as $199.00

View Product

Add to compare

Filters

Sort

What are the main benefits of mounting a red dot sight on a shotgun?

The first and biggest benefit is the faster and easier aiming possibility since your eyes do not need to focus on bead sights or open sights on the rifle, and on the same time also on the target. This is especially noticeable among older shooters, which do not see so good anymore like the younger ones. Because aiming with a red dot sight is much faster, it is the perfect solution for driven hunts, where the hunter does not have much time to place the perfect shot.

A mounted red dot sight on a shotgun is also very handy for shooters which have opposite dominance of the eyes and arms – right hand and left eye for example.

As most of the hunters know, aiming over the rib with bead sights isn’t very accurate since different shotguns shoot differently.

This is especially noticeable when shooting slugs.
With a red dot, the shotgun can be shot very accurately and the red dot can be perfectly zeroed.

Why this aren’t picatinny rails that are going straight to the rifle body?

Shotguns with a pre-mounted Picatinny rail are mostly tactical shotguns, which are used by the police and military. But because the Picatinny rails are very popular for mounting optics and other accessories, many semi-auto hunting shotguns have the holes for mounting a rail already prepared.

In this category, we listed mounts that can be mounted

directly on the rib of the shotgun or
between the stock and the action of the rifle.

To do so, the rib on the rifle has to be ventilated. A ventilated rib is most common on "over and under" shotgun rifles, and is very rare on "side by side" shotgun rifles.

It is worth to mention that all mounts that come on the rib of a shotgun have to be pushed towards the muzzle to ensure a perfect fit with no movement during shooting sessions.

Picatinny rails for mounting on the "rib" of a shotgun

A Picatinny rail that can be mounted on the rib of a shotgun has one major benefit – it can be mounted on the entire length of the rib, so every user can adjust the eye-relief to his favorite position.

When a Picatinny rail is mounted, also the selection of the red dot sights increases. Almost all sights on the market feature a mounting solution for a Picatinny rail, so the user can easier decide what to mount. It is, whatsoever, worth mentioning that these Picatinny rails are not designed to be used with combination with a traditional rifle scope since the additional weight could damage the rib on the shotgun.

Because of the different shapes of the ribs on the shotguns, the manufacturers produce these Picatinny rails in different dimensions for each individual rifle. The most known manufacturer of such Picatinny rails is Recknagel, which has the widest selection on the market.

Docter Sight mounts for mounting on the "rib" of a shotgun

The "Docter Sight" mounting platform is the most common platform on red dot sights on the market. There are many companies that use this platform as their preferred one, because in most cases it is the lowest mounting solution.

The red dot sights that use this mounting platform are from design up very low, which is perfect for mounting on a shotgun since the aiming point does not travel too much higher, and the user still has to aim over the rib as before.

Typically, these mounts can be mounted on many types of shotgun ribs, so they are not designed for one specific rib on one specific shotgun.

Aimpoint Micro mounts for mounting on the "rib" of a shotgun

Aimpoint Micro mounts are practically the same as the Docter Sight mounts, just that they have an Aimpoint Micro profile instead of a Docter Sight profile. Today, this footprint is also widely used for other red dots on the market.

From the combination of these mounts and Aimpoint Micro red dots, the idea for the Micro S-1 was born.

Docter Sight mounts for mounting between the stock and the action of the rifle

To mount a red dot sight between the stock and the action on a shotgun was an idea from the American company Burris, which is owned by the Beretta group. In this group are also many companies which produce shotgun rifles, such as Benelli, Franchi, Stoeger, and so on.

On these mounts not only the Docter Sights can be mounted, but all red dot sights on the market that have the same footprint.

The main benefit of such a mount is the distance to the eye – because it is very close, the user quickly finds the red dot in his field of view. Whatsoever, many users don’t like this solution because the aesthetics of the rifle changes.

Red dot sights that can be mounted directly on the "rib" of a shotgun

The first red dot sight on the market with such a solution was from the Swedish company Redring. It can be mounted on any rib width ranging from 5 to 11.5 mm, on Over/Under, and Semi-automatic shotguns.

Because such sights are gaining on popularity, more and more companies design their own red dot sights that can be mounted directly on the rib of the shotgun.

In this category, you can find:

passive sights such as Easy hit, all the way to
Docter/Noblex Quicksight,
Aimpoint Micro s-1 and
similar.

Single piece scope mounts

Introduction

Besides Picatinny rails, there are other rail standards that are also common with this design of scope mounts, for example:

Two groups of Single piece scope mounts for different purposes

PROS

CONS

Is lapping still advisable with one piece scope mounts?

Single piece mounts with an inclination

Conclusion

Noblex Sight Mount for GMF Ventilated Rails

What are the main benefits of mounting a red dot sight on a shotgun?

Why this aren’t picatinny rails that are going straight to the rifle body?

Picatinny rails for mounting on the "rib" of a shotgun

Docter Sight mounts for mounting on the "rib" of a shotgun

Aimpoint Micro mounts for mounting on the "rib" of a shotgun

Docter Sight mounts for mounting between the stock and the action of the rifle

Red dot sights that can be mounted directly on the "rib" of a shotgun

Payment methods

Shipping methods

Shopping

Contact us

Certificates

Follow us on

FAQ and Media

Single piece scope mounts

Introduction

Besides Picatinny rails, there are other rail standards that are also common with this design of scope mounts, for example:

Two groups of Single piece scope mounts for different purposes

PROS

CONS

Is lapping still advisable with one piece scope mounts?

Single piece mounts with an inclination

Conclusion

Noblex Sight Mount for GMF Ventilated Rails

What are the main benefits of mounting a red dot sight on a shotgun?

Why this aren’t picatinny rails that are going straight to the rifle body?

Picatinny rails for mounting on the "rib" of a shotgun

Docter Sight mounts for mounting on the "rib" of a shotgun

Aimpoint Micro mounts for mounting on the "rib" of a shotgun

Docter Sight mounts for mounting between the stock and the action of the rifle

Red dot sights that can be mounted directly on the "rib" of a shotgun

Your wishlist